Product Description
Chrysler Pacifica 2004-2008 Side Molding Insert Kit, 12 Pieces (TH44752)
TH44752 is the Insert Kit in the Pacifica rocker family: twelve polished stainless steel pieces for the Chrysler Pacifica four-door SUV, 2004-2008. Its only placement note is two words, "Side Molding," and unlike its two rocker siblings, this record gives no width at all.
Three Pacifica rocker records, three different jobs
- TH44750, an eight-piece Upper Kit, spans from the bottom of the molding down.
- TH44751, an eight-piece Lower Kit, spans from the bottom of the door up.
- TH44752, this twelve-piece Insert Kit, is tied to the side molding itself.
The catalog doesn't say whether any of these can be combined on one vehicle, so if you're thinking about pairing the insert with one of the others, call 877-752-3811 first and describe the look you're after.
No width on the record
Most rocker listings state a width in inches. This one doesn't, so you can't size it with a ruler from the description alone. Compare the product photos with your own side molding, and if you're unsure the inserts match the strip on your Pacifica, send a picture of a front and a rear door to 877-752-3811 before you order.
What the molding has to look like
An insert kit depends on the molding being there and in good shape. Press along each strip; if a section lifts or has been replaced with something different, sort that out first. The molding isn't part of this kit.
Twelve pieces to keep straight
The data doesn't map the twelve pieces to doors or positions. Lay them out on a soft towel, compare them with the product photos, and write a position on each liner with a marker.
Material and mounting
The twelve Pacifica molding pieces are USA-made polished 26 gauge 304 stainless on 3M automotive-grade acrylic foam tape. According to QAA, it will hold for a lifetime without damaging the SUV.
Getting the strips clean
Wash the molding with soapy water, rinse, and let it dry completely. Then wipe the face of each strip with isopropyl alcohol until no residue shows on the cloth. Old protectant or dressing has to come off.
Fitting each insert
Hold a piece against its strip with painter's tape and check that both ends and both long edges sit where you want them. Peel back just a few inches of liner, set that end, then draw the rest of the liner out while pressing the steel down. Go over every piece with firm hand pressure at the end.
Checking the result
Step back to the front corner of the Pacifica and look down the side. The inserts should read as one line across the doors. Open each door to make sure nothing catches at the gaps. Give the tape a day before you wash.
Rest of the Pacifica group
The record also links pillar post kits (PP44750, PP44751, PP44752), window packages (WP44750, WP44751), a gas door cover (GC44750), front vent trim (FV44750), a license plate bezel (LP44750) and a tailgate handle ring (DH44750).
Questions about TH44752? Quality Automotive Trims, 877-752-3811. UPC 691821510528.
TH44752 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH44752 |
| UPC | 691821510528 |
| Part type | Rocker Panel Trim, Insert Kit |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Side Molding |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2008 Chrysler Pacifica |
Fitment: TH44752
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Pacifica | 2004-2008 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2008 Chrysler Pacifica
- DH44750: 1-piece Tailgate Handle Accent Trim Ring
- FV44750: 2-piece Front Vent Trim
- GC44750: 1-piece Gas Door Cover Trim
- LP44750: 1-piece License Plate Bezel
- PP44750: 4-piece Pillar Post Trim
- PP44751: 8-piece Pillar Post Trim
- PP44752: 6-piece Pillar Post Trim
- TH44750: 8-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Insert Kit
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH44752 Rocker Panel Trim, Insert Kit
What does TH44752 fit?
The Chrysler Pacifica four-door SUV, 2004-2008.
How wide are the pieces?
The record doesn't give a width. Compare the photos with your molding or call 877-752-3811.
Can I use it with TH44750 or TH44751?
The catalog doesn't say. Call 877-752-3811 before combining kits.
How many pieces are included?
Twelve.
Is the side molding included?
No. The inserts go on the molding already on the vehicle.
