Product Description
Chrysler Pacifica 2004-2008 Stainless Front Vent Accent, 2 Pieces (FV44750)
FV44750 is a pair of polished stainless vent accents for the front of the 2004-2008 Chrysler Pacifica 4-door SUV. The pieces are 304 stainless steel at 26 gauge, made in the USA, and mount with 3M automotive-grade acrylic foam tape.
What you're getting
Two front vent accents. The catalog doesn't name the exact vents, list dimensions, or describe the shape in words. The product photos show all of that, so compare them with the front of your Pacifica. If you're not sure they match, a call to us will settle it before you order.
Fitment
Chrysler Pacifica, 2004-2008, 4-door SUV, on a single row. The Fitment tab shows it.
Pacifica trim to pair with
Plenty of related trim is cross-listed for this SUV:
- DH44750, a one-piece tailgate handle accent trim ring.
- GC44750, gas door cover trim.
- LP44750, license plate bezel.
- PP44750, PP44752 and PP44751, pillar post trims in four, six and eight pieces.
- TH44750, an eight-piece upper rocker kit spanning from the bottom of the molding down to 4.75-6.
TH44751, TH44752, WP44750 and WP44751 are listed too, with details on their own pages.
Stainless details
Polished 304 at 26 gauge. Its shine is polished steel, not a plated finish.
Mounting
Both pieces install directly over the existing surface, so nothing is drilled. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Cleaning around vents
Vents collect dust and bugs in their corners, and wax tends to build up along the edges. Wash with a soft brush, rinse, and degrease every mounting surface. Use a cotton swab to reach tight spots. Let it all dry completely before starting.
Fitting the two pieces
Hold each accent in place with the liner on and check its position from in front of the SUV. Mark the edges with painter's tape. Peel one liner, align, and press firmly over the whole piece, then press again after a minute. Do the second and compare the two side by side for an even look. The Installation tab has full prep.
Why the vents
The vents are part of what gives a front end its look. Outlining them in polished steel draws the eye there and leaves the vents themselves unchanged.
Ordering checklist
Confirm a 2004-2008 Pacifica, compare the photos with your vents, and check the surface condition. If you're also considering pillar posts, the three sizes differ only in piece count on this sheet, so compare their photos or call to choose.
Measuring for even spacing
Two vent accents will always be compared to each other. Before you press either one down, measure from a fixed point, such as the grille edge or headlight, to each piece and keep the numbers matched. A helper in front of the SUV makes it easier.
Conditions
Mild, dry day, out of direct sun. Keep the SUV dry overnight.
Care
Mild soap and a soft cloth.
Questions
Pacifica questions on FV44750 can go to 877-752-3811; look under Specs for the UPC.
FV44750 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FV44750 |
| UPC | 691821283750 |
| Part type | Front Vent Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2008 Chrysler Pacifica |
Fitment: FV44750
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Pacifica | 2004-2008 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2008 Chrysler Pacifica
- DH44750: 1-piece Tailgate Handle Accent Trim Ring
- GC44750: 1-piece Gas Door Cover Trim
- LP44750: 1-piece License Plate Bezel
- PP44750: 4-piece Pillar Post Trim
- PP44751: 8-piece Pillar Post Trim
- PP44752: 6-piece Pillar Post Trim
- TH44750: 8-piece Rocker Panel Trim, Upper Kit
- TH44751: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Front Vent Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FV44750 Front Vent Trim
What does FV44750 fit?
The 2004-2008 Chrysler Pacifica 4-door SUV.
How many pieces?
Two front vent accents.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
Is there matching trim?
Yes, including PP44750, PP44751 and PP44752 pillar post trims and the TH44750 rocker kit.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
