Product Description
Chrysler 300 2005-2008 Stainless Fog Light / Front Vent Trim, 4 Pieces (FV45760)
Four pieces of polished stainless for the front of a Chrysler 300 sedan: that's FV45760. QAA lists it for the 4-door sedan from 2005 through 2008. It's cut from 304 stainless steel at 26 gauge in the USA and mounts with 3M automotive-grade acrylic foam tape.
Naming
The title and the part-type field say front vent accent. The included-items line says fog light trim. Different words for what is, in both cases, polished trim at the front of the car. We've passed the mismatch along for review. The catalog gives no dimensions and doesn't explain where the four pieces go, so the product photos do the explaining here.
Model years to note
This listing's fitment row ends at 2008: Chrysler 300, 2005-2008, 4-door Sedan. If you own a 300 from a later year, it's not covered here. The Fitment tab has the row.
Four pieces, in practice
Unpack all four and set them on a clean towel next to the photos. Use the photos to work out which pieces belong together and where each set goes on the 300. Put a small piece of painter's tape on each, labeled with its position from the photos, before any liners come off. That small bit of planning prevents mix-ups once the adhesive is exposed.
Material
Type 304 stainless, 26 gauge, polished. The bright finish is polished into the steel, not plated on.
Tape mounting
Everything installs directly over the existing surface. You won't need a drill. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Cleaning
Fog light and vent areas sit low, where bugs, sand and road film collect. Scrub gently with a soft brush and soapy water, rinse, and go over every mounting spot with degreaser. Repeat until the cloth stays clean. A swab gets into narrow edges. Let it dry.
Install, one piece at a time
Start with one set. Hold the first piece in place with its liner, check it from the front of the car, and mark it with tape. Peel, align, and press firmly over its whole surface. Press again a minute later. Fit the rest the same way. Then do the remaining pieces, standing back often to compare them with the first. The Installation tab covers prep in full.
The payoff
Low front accents catch light at the corners of the 300's face, without changing any lights or vents underneath.
Quick checks before buying
Make sure your 300 is a 2005-2008 sedan. Look over the photos and compare them with your car's lower front. If they don't look alike, call.
Low-mounted trim
You'll be working close to the ground, so a kneeling pad and a flashlight make the job more comfortable.
Weather
Pick a mild, dry day and keep out of direct sun. Keep the car dry overnight.
Cleaning later
Mild soap, soft brush or towel.
Questions
For the four Chrysler 300 accents, call 877-752-3811 and mention FV45760. For the Chrysler 300 vent accents, Specs has the barcode.
FV45760 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FV45760 |
| UPC | 691821530670 |
| Part type | Front Vent Accent |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2008 Chrysler 300 |
Fitment: FV45760
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler 300 | 2005-2008 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Front Vent Accent
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FV45760 Front Vent Accent
What does FV45760 fit?
The 2005-2008 Chrysler 300 4-door sedan.
Is it vent trim or fog light trim?
The title and part type say front vent accent, and the included-items line says fog light trim. Check the photos or call 877-752-3811.
How many pieces?
Four.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
