Product Description
Chrysler 300 2005-2010 Arrow Side Molding Accent, 14-Piece Polished Stainless (AT45765)
The 2005-2010 Chrysler 300 sedan is the car this kit is cut for, and the doors are where it goes. QAA's AT45765 builds on that with a fourteen-piece body side molding accent in polished stainless steel. QAA lists it as "Arrow - 1.25" wide," so the accent is a generous inch and a quarter across and finishes in pointed, arrow-shaped ends rather than square cuts. On a sedan this size, it reads as bold, deliberate trim.
The arrow design
Fourteen pieces let the arrow profile follow the 300's body in shaped segments. QAA does not list the position of each segment, so the product photos are your guide to the layout. Look at them before you order to make sure the look is the one you want, and keep them handy when you install.
Material and finish
Each segment is made in the USA from 26-gauge 304 stainless steel and polished to a mirror shine. Solid stainless means the shine is the metal itself, so it sits naturally next to any chrome or bright trim already on your 300. Grade 304 is one of the most common stainless grades for exterior trim, and 26 gauge tells you the thickness of the sheet.
Installation
Every piece comes with 3M automotive-grade acrylic foam tape pre-applied. The kit installs directly over the existing surface of the doors and body, so you will not drill or remove anything. QAA states the tape will hold for a lifetime without causing any damage to the surface. Arrow kits look best when every segment lines up, so dry-fit the whole run end to end before you peel any liner, and step back to check the line. The Installation tab covers prep and order of work.
A long list of 300 trim
QAA catalogs plenty of companion parts for this sedan, and several carry their own restrictions:
- TH45765 is a four-piece rocker trim below the door at 4.5" wide. TH45762 is a side molding insert kit for the Base Model only.
- Window packages WP45760 and WP45765 are for the Base Model only. WP45766 and WP45767 are for the C-Model only, and WP45766 is cut for the model with factory chrome.
- There is also a rear bumper accent (Base Model only), a bumper package, an engine trim and a 25-piece engine package, a license plate bezel, a rear deck accent, a grille accent, and wheel well fender trim moldings.
The catalog lists no Base or C-Model restriction on this side accent. All companion parts are linked in the Fitment tab.
Fitment
Listed for the 4-door Chrysler 300 sedan, 2005, 2006, 2007, 2008, 2009, and 2010. That is six model years of the same body. The Fitment tab shows the row exactly as QAA catalogs it, so compare your car to it before you place the order. If you have the limousine stretch version, note that QAA lists a separate rocker kit, TH45766, for the 54" stretch, but this side accent is listed for the sedan.
Questions
Call Quality Automotive Trims at 877-752-3811 with your year and model, and mention AT45765. The UPC is listed in the Specs tab.
AT45765 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT45765 |
| UPC | 691821435838 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 14 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.25" |
| Coverage / notes | Arrow - 1.25" wide |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2010 Chrysler 300 |
Fitment: AT45765
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler 300 | 2005-2010 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2010 Chrysler 300
- BI45760: 4-piece Bumper Package
- EC45760: 1-piece Engine Trim
- EP45760: 25-piece Engine Trim Package
- LP45760: 1-piece License Plate Bezel
- RB45760: 3-piece Rear Bumper Trim Accent
- RD45760: 1-piece Rear Deck Accent
- TH45762: 4-piece Rocker Panel Trim, Insert Kit
- TH45765: 4-piece Rocker Panel Trim, On the rocker
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 14 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT45765 Body Side Molding Accent Trim
Which Chrysler 300 does AT45765 fit?
The 2005 through 2010 Chrysler 300, 4-door sedan.
Is it only for the Base Model or the C-Model?
The catalog lists no Base or C-Model restriction for this kit. Some companion parts do have one, so check each listing.
How wide is the accent?
1.25", in an arrow profile, fourteen pieces.
What is it made from?
Polished 26-gauge 304 stainless steel, made in the USA.
How is it installed?
With pre-applied 3M acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without damaging the paint.
Who can confirm fitment?
Quality Automotive Trims, 877-752-3811.
