Product Description
Chrysler 300 Bumper Package, 2005-2010 Sedan: Four 0.375" Stainless Inserts for Front and Rear (BI45760)
A fine line can do more than a wide one. BI45760 is QAA's four-piece bumper package for the 2005-2010 Chrysler 300 4-door sedan, and its defining spec is a slender 0.375" width. QAA describes it as a front and rear insert, so this one package places a thin line of polished stainless on both bumpers. At three-eighths of an inch, it is a pinstripe of steel rather than a bold band, which keeps the big sedan's face and tail looking clean.
Model years at a glance
2005, 2006, 2007, 2008, 2009, 2010. Six years of the Chrysler 300 4-door sedan are listed for this package, all on one catalog row. Unlike some 300 trim in the QAA catalog, the fitment row for BI45760 does not carry a base-model restriction. If you have any doubt about your car, call us before ordering. We would much rather confirm the fit on the phone than have you send a part back.
The insert concept
QAA calls this an insert, which describes a piece of trim that sits into or along a feature of the bumper rather than covering it. Four pieces are split between the front and rear. The catalog does not state how they are divided or exactly where each sits, so please use the product photos as your guide.
Stainless, inside and out
The package is made in the USA from 26-gauge 304 stainless steel with a polished mirror finish. There is no chrome over plastic here; it is steel throughout. Grade 304 is one of the most widely used stainless alloys, and 26 gauge is the sheet thickness.
Installation
QAA applies 3M automotive-grade acrylic foam tape to every piece before shipping, and the inserts install directly over the existing surface of the bumpers. You do not drill and you do not remove the fascias. QAA states the tape will hold for a lifetime without causing any damage to the paint. Thin trim shows any wobble, so take care to keep each piece straight; a strip of painter's tape as a guide line helps, and so does working one bumper at a time. The Installation tab has full steps.
Plenty to pair it with
The 2005-2010 300 has a large QAA lineup. AT45765 is a fourteen-piece body side molding accent with an arrow profile at 1.25" wide, which would carry bright steel down the sides between the two bumpers. RD45760 is a one-piece rear deck accent at 3.62", and LP45760 is a one-piece license plate bezel. For under the hood, EC45760 is a single engine trim piece and EP45760 is a twenty-five-piece engine trim package. Note that RB45760, a three-piece rear bumper trim accent, and TH45762, a four-piece rocker insert at 1.438", are both listed for the base model only. Window and rocker packages round out the list in the Fitment tab.
Reach Quality Automotive Trims
Call 877-752-3811 and ask about part number BI45760. The UPC is in the Specs tab.
BI45760 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | BI45760 |
| UPC | 691821279081 |
| Part type | Bumper Package |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.375" |
| Coverage / notes | 0.375" Width Front and Rear Insert |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2010 Chrysler 300 |
Fitment: BI45760
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler 300 | 2005-2010 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2010 Chrysler 300
- AT45765: 14-piece Body Side Molding Accent Trim
- EC45760: 1-piece Engine Trim
- EP45760: 25-piece Engine Trim Package
- LP45760: 1-piece License Plate Bezel
- RB45760: 3-piece Rear Bumper Trim Accent
- RD45760: 1-piece Rear Deck Accent
- TH45762: 4-piece Rocker Panel Trim, Insert Kit
- TH45765: 4-piece Rocker Panel Trim, On the rocker
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Bumper Package
- Unpack all 4 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: BI45760 Bumper Package
How wide is the BI45760 trim?
QAA lists it at 0.375" wide.
Does it cover both bumpers?
Yes. It is a four-piece front and rear insert package.
Which Chrysler 300 years does it fit?
The 2005 through 2010 Chrysler 300 4-door sedan.
Is it limited to the base model?
The fitment row for this package does not list a base model restriction. Some other 300 parts, like RB45760 and TH45762, are base model only.
How does it install?
With pre-applied 3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without damaging the paint.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
