Product Description
Chrysler 300 2005-2010 Stainless Engine Trim, 1 Piece (EC45760)
EC45760 takes polished stainless under the hood. It's a single piece of engine trim for the Chrysler 300 4-door sedan, 2005 through 2010, made in the USA from 304 stainless steel at 26 gauge and mounted with 3M automotive-grade acrylic foam tape.
What engine trim is
Engine trim is an accent for the engine bay, giving a polished surface where you see it with the hood up. This listing is one piece. The catalog doesn't describe which engine-bay surface it sits on, so the product photos are the guide. Compare them with what you see under your own hood, and call before ordering if you're unsure.
One piece or the package
The same sedan also has EP45760, a 25-piece engine trim package. If you want a single accent, EC45760 is it; if you want more of the engine bay dressed, look at the package. The catalog doesn't say whether this single piece is part of that package, so check both listings' photos.
Fitment
One row: Chrysler 300, 2005-2010, 4-door Sedan. The Fitment tab shows it.
Material and mounting
Type 304 stainless at 26 gauge, polished. The piece installs directly over the existing surface on tape, with no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Prep under the hood
Engine bays collect oil film and dust, and tape won't bond to either. Work on a cool engine. Clean the mounting surface thoroughly with a degreaser, wipe off all residue, and let it dry completely. Check that the surface is solid and free of loose coatings.
Fitting it
With the liner still on, hold the piece where the photos show it and check the alignment. Mark the edges with painter's tape. Peel the liner, line up with the marks, and press firmly over the whole piece, then again after a minute. Let it sit before driving if you can. The Installation tab has full prep steps.
More Chrysler 300 trim
The sheet cross-lists a long run of exterior trim for this sedan, including:
- AT45765, a 14-piece body side molding accent with an arrow shape, 1.25" wide.
- BI45760, a four-piece bumper package with a 0.375" front and rear insert.
- LP45760, a license plate bezel.
- RB45760, a three-piece rear bumper accent, Base Model only.
- RD45760, a rear deck accent at 3.62.
- TH45762, a four-piece rocker insert kit for the side molding at 1.438, Base Model only.
More listings follow (TH45765, TH45766, WP45760 and others); see each page for details.
Why an engine accent
If you open the 300's hood to show the car, a polished piece in the bay is a finished detail most cars lack. It changes nothing mechanical. A small flashlight helps when lining it up in tight spots, and dry-fitting with painter's tape marks keeps it exactly where you planned once the liner is off.
Care
Wipe with mild soap and water on a cool engine. Avoid abrasives.
Questions
Call Quality Automotive Trims at 877-752-3811 and mention EC45760. The UPC is on the Specs tab.
EC45760 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | EC45760 |
| UPC | 691821666171 |
| Part type | Engine Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2010 Chrysler 300 |
Fitment: EC45760
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler 300 | 2005-2010 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2010 Chrysler 300
- AT45765: 14-piece Body Side Molding Accent Trim
- BI45760: 4-piece Bumper Package
- EP45760: 25-piece Engine Trim Package
- LP45760: 1-piece License Plate Bezel
- RB45760: 3-piece Rear Bumper Trim Accent
- RD45760: 1-piece Rear Deck Accent
- TH45762: 4-piece Rocker Panel Trim, Insert Kit
- TH45765: 4-piece Rocker Panel Trim, On the rocker
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Engine Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: EC45760 Engine Trim
What does EC45760 fit?
The 2005-2010 Chrysler 300 4-door sedan.
How many pieces?
One engine trim piece. A 25-piece engine trim package, EP45760, is listed separately.
Where does it mount?
The catalog does not describe the exact location. Check the photos or call 877-752-3811.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
How does it attach?
With 3M automotive-grade acrylic foam tape, directly over the existing surface. No drilling.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
