Product Description
Chrysler 300 2005-2010 Stainless Engine Trim Package, 25 Pieces (EP45760)
At 25 pieces, EP45760 is a full engine bay dress-up for the Chrysler 300 4-door sedan, model years 2005 through 2010. Each of the 25 pieces is polished 304 stainless steel at 26 gauge, made in the USA. 3M automotive-grade acrylic foam tape holds every piece.
Package or single piece
QAA lists two engine trim options for this sedan. EP45760 is the 25-piece package. EC45760 is a single engine trim piece. The catalog doesn't say whether that single piece is included in this package, so compare the photos on both listings, or call, if you're deciding between them.
Fitment
Chrysler 300, 2005-2010, 4-door Sedan, on one row. The Fitment tab has the entry.
Organizing 25 pieces
The catalog doesn't describe where each piece goes, so the product photos are the map. With this many parts, organization is everything. Lay them out on a clean towel, match each to the photos, and label them with numbered painter's tape. Work through the engine bay in a set order, such as front to back or left to right, so nothing gets skipped. If a piece doesn't seem to have a home, stop and call us.
Steel and tape
Type 304 stainless, 26 gauge, polished; the shine is the steel's surface, not a coating. Every piece installs directly over the existing surface, so there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Preparing the engine bay
Only work with the engine cold. Covers and surfaces under the hood carry oily film and dust that tape won't stick through. Degrease each mounting area and wipe until the cloth comes away clean. Make sure nothing is loose or flaking. Dry completely.
The install itself
One piece at a time: dry-fit with the liner on, mark the edges with painter's tape, peel, align, and press firmly over the whole piece. Press again after a minute. A flashlight helps in tight spots. Plan on an unhurried session; this is a bigger job than a single accent. Full prep is on the Installation tab.
Outside the hood
The sheet also cross-lists exterior trim for this 300:
- AT45765, 14-piece arrow-shaped body side molding accent, 1.25" wide.
- BI45760, four-piece bumper package with a 0.375" front and rear insert.
- LP45760, license plate bezel.
- RB45760, three-piece rear bumper accent, Base Model only.
- RD45760, rear deck accent at 3.62.
- TH45762, four-piece rocker insert kit at 1.438, Base Model only.
TH45765, TH45766, WP45760 and more are listed too; see their pages.
Why go all in
If you show the car with the hood open, a fully dressed engine bay matches a polished exterior. The accents change nothing mechanical.
Checklist
Confirm a 2005-2010 Chrysler 300 sedan, review the photos against your engine bay, decide between this package and EC45760, and set aside time with a cool engine.
Care
Mild soap and a soft cloth, engine cool. No abrasives.
Questions
Call Quality Automotive Trims at 877-752-3811 and mention EP45760. UPC is on the Specs tab.
EP45760 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | EP45760 |
| UPC | 691821379002 |
| Part type | Engine Trim Package |
| Pieces in kit | 25 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2010 Chrysler 300 |
Fitment: EP45760
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler 300 | 2005-2010 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2010 Chrysler 300
- AT45765: 14-piece Body Side Molding Accent Trim
- BI45760: 4-piece Bumper Package
- EC45760: 1-piece Engine Trim
- LP45760: 1-piece License Plate Bezel
- RB45760: 3-piece Rear Bumper Trim Accent
- RD45760: 1-piece Rear Deck Accent
- TH45762: 4-piece Rocker Panel Trim, Insert Kit
- TH45765: 4-piece Rocker Panel Trim, On the rocker
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Engine Trim Package
- Unpack all 25 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: EP45760 Engine Trim Package
What does EP45760 fit?
The 2005-2010 Chrysler 300 4-door sedan.
How many pieces?
25 engine trim pieces.
Is there a single-piece option?
Yes, EC45760 is a one-piece engine trim for the same sedan.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
