Product Description
2005-2010 Chrysler 300 Sedan Rocker Trim, On the Rocker, 4.5", 4 Pieces (TH45765)
TH45765 covers the rocker below the doors on a 2005-2010 Chrysler 300 four-door sedan with four polished stainless steel pieces, each in a 4.5" band. "Installs below the door" is the note. Unlike the linked insert kit, this record has no trim-level limit.
Three rocker records for the 300
- TH45765 (this kit): four pieces, 4.5", on the rocker, four-door sedan.
- TH45766: six pieces, 4.5", on the rocker, for a 54" stretch limousine.
- TH45762: four pieces, 1.438", on the side molding, Base Model only.
If your car is a standard sedan, this is the rocker kit. If it's been stretched, look at TH45766. The data doesn't say whether the insert kit and this rocker kit can be combined; call 877-752-3811 for that.
Rocker room
Four and a half inches is a broad band. Before ordering, hold a tape measure against the rocker face under each door and make sure that much flat surface is there. Painter's tape at 4.5" shows the finished line.
Material and mounting
The Chrysler 300's four rocker pieces are USA-made, polished 26 gauge 304 stainless steel, fixed over the existing surface with 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime without damaging the sedan.
Get the rocker clean
Brush away road film with soapy water, rinse, dry, and finish with isopropyl alcohol across the full band. Touch up chips and stone nicks first.
Four pieces
The data gives no piece layout. Sort them with the product photos and label each liner.
Installation
- Dry-fit with painter's tape and check from the front corner.
- Peel back a few inches of liner and anchor one end.
- Press along as you pull the liner out.
- Firm pressure along every piece.
Chrysler 300 spacing
Measure the first pieces from the door openings and wheel openings and use those numbers for the rest.
Linked 300 accessories
Body side molding accent AT45765, bumper inserts BI45760, engine trim EC45760 and EP45760, plate bezel LP45760, rear bumper accent RB45760, rear deck accent RD45760, wheel well trim WZ45765, and window packages WP45760, WP45765, WP45766 and WP45767. Some of these carry Base Model or C-Model tags; check each one's listing.
Afterward
Check that the 300's doors clear the trim, and leave it a day before washing.
Care
Clean with mild soap and a soft mitt, then towel the 300 dry.
Weather
A garage or a mild, dry day works.
Helper
A second person keeps the far end of each wide piece off the paint.
Before ordering
A standard four-door 300 from 2005 to 2010 with at least four and a half inches of flat rocker under each door is what this record describes. If your car is a stretch, has aftermarket side skirts, or anything else covers the rocker, send photos to 877-752-3811 first.
What to send if you call
Have ready your 300's year, a photo of one whole side, and a close-up of the rocker under the front door.
Lower edge
Check the rocker edge for curb scrapes and touch them up before the steel goes on.
Chrysler 300 kit TH45765, UPC 691821614127. Quality Automotive Trims, 877-752-3811.
TH45765 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH45765 |
| UPC | 691821614127 |
| Part type | Rocker Panel Trim, On the rocker |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.5" |
| Coverage / notes | Installs below the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2010 Chrysler 300 |
Fitment: TH45765
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler 300 | 2005-2010 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2010 Chrysler 300
- AT45765: 14-piece Body Side Molding Accent Trim
- BI45760: 4-piece Bumper Package
- EC45760: 1-piece Engine Trim
- EP45760: 25-piece Engine Trim Package
- LP45760: 1-piece License Plate Bezel
- RB45760: 3-piece Rear Bumper Trim Accent
- RD45760: 1-piece Rear Deck Accent
- TH45762: 4-piece Rocker Panel Trim, Insert Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, On the rocker
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH45765 Rocker Panel Trim, On the rocker
What does TH45765 fit?
The Chrysler 300 four-door sedan, 2005-2010.
Where does it go?
On the rocker below the doors. Width is 4.5".
Is it limited to the base model?
This record has no trim-level tag. The insert kit TH45762 is Base Model only.
Does it fit a stretch limousine?
No. For a 54" stretch, see TH45766.
