Product Description
Chrysler 300 Limousine, 54" Stretch, 2005-2010 Rocker Trim, 4.5", 6 Pieces (TH45766)
TH45766 is a rocker kit for a stretched Chrysler 300: the fitment reads "Limousine, 54" Stretch," model years 2005-2010. Six polished stainless steel pieces, 4.5" wide, "Installs below the door," with a second note: "54" Between wheel wells."
Measure between the wheel wells
The record ties this kit to one measurement. Before ordering, measure between the wheel wells. If your car's stretch isn't 54", or you're not sure how the stretch was measured, call 877-752-3811 with photos of each side and your measurements. Don't order on the stretch figure alone.
Door count isn't stated
The tag doesn't give a door count, and the data doesn't say how the six pieces are laid out along the longer body. Compare them with the product photos and sort them before you peel anything.
Sedan version
For a standard 300 sedan, the linked TH45765 is four pieces at the same 4.5" width. The linked TH45762 insert kit for the side molding is for the sedan's Base Model only, and its record doesn't mention limousines.
What it's made of
For the 54" stretch Chrysler 300 limousine, the six pieces are polished 26 gauge 304 stainless steel made in the USA, fixed below the doors with 3M automotive-grade acrylic foam tape over the existing surface. QAA says the tape will hold for a lifetime without harming the limousine.
Prep along the whole length
A long rocker means more surface to clean. Wash, rinse and dry it end to end, then wipe the band with isopropyl alcohol. If any part of the rocker looks uneven or repaired, send a photo before installing.
Lay out the run first
Tape a full run of pieces in place with painter's tape and step back to see it before any liner comes off. Then set them one at a time: peel a few inches of liner, align the end, press along, and finish with firm pressure.
Wheel-well spacing
Measure each piece's position from the wheel wells and carry those figures through the kit.
Linked accessories
The 300 group's other records (AT45765, BI45760, EC45760, EP45760, LP45760, RB45760, RD45760, WZ45765 and the four WP window packages) are tagged for the sedan, not the limousine. Ask before ordering any of them for a stretch car.
Afterward
Check each Chrysler 300 door opens clear of the trim, then wait a day before washing.
Care
Clean the 300 with mild soap and a soft wash mitt.
Conditions
A large garage or a dry, mild day.
Helpers
Two people make the longer pieces easier to place.
What to send when you call
Model year, the measurement between the wheel wells on each side, the number of doors, and photos of both full sides. With those we can check whether the six pieces match your car.
Room to work
Plan enough space to walk the full length of the car while you install, and sight along it from the corners when you finish.
Rocker condition
Touch up chips or scrapes along the lower edge before installing.
For the six-piece 300 kit TH45766 (UPC 691821270804), phone 877-752-3811.
TH45766 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH45766 |
| UPC | 691821270804 |
| Part type | Rocker Panel Trim, On the rocker |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.5" |
| Coverage / notes | 54"Between wheel wells; Installs below the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2010 Chrysler 300 |
Fitment: TH45766
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler 300 | 2005-2010 | Limousine, 54" Stretch |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2010 Chrysler 300
- AT45765: 14-piece Body Side Molding Accent Trim
- BI45760: 4-piece Bumper Package
- EC45760: 1-piece Engine Trim
- EP45760: 25-piece Engine Trim Package
- LP45760: 1-piece License Plate Bezel
- RB45760: 3-piece Rear Bumper Trim Accent
- RD45760: 1-piece Rear Deck Accent
- TH45762: 4-piece Rocker Panel Trim, Insert Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, On the rocker
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH45766 Rocker Panel Trim, On the rocker
What does TH45766 fit?
A Chrysler 300 limousine with a 54" stretch, 2005-2010.
How do I check the stretch?
The record says 54" between wheel wells. Measure yours and call 877-752-3811 if it differs.
Where does it go?
On the rocker, below the doors, 4.5" wide.
How many pieces?
Six.
