Product Description
Chrysler PT Cruiser Convertible 2004-2010: Lower Rocker Kit, 5.2", 6 Pieces (TH44705)
TH44705 is for the PT Cruiser convertible. The fitment row reads "Chrysler PT Cruiser 2004-2010 | 2-door, Convertible," and the kit is six pieces of polished stainless steel, 5.2" wide, filed as a Lower Kit that "Spans from the bottom of the door UP to the specified width."
Convertible, not the hatchback
The four-door hatchback PT Cruiser has its own rocker kit in the catalog with a different width and piece count. This record names only the two-door convertible. Check your body style before ordering; if you're not sure the record matches, call 877-752-3811.
Five point two inches
The width is given to a tenth of an inch, 5.2". Measure up from the bottom of a door and mark that height with painter's tape to see the band before buying.
No linked parts
The record has no siblings, so this sheet doesn't pair the kit with a plate bezel, wheel well trim or anything else for the convertible.
Material
- Polished 304 stainless steel, 26 gauge, top quality.
- The PT Cruiser steel is built in the USA.
- Fixed on the convertible as it is with 3M automotive-grade acrylic foam tape.
Per QAA, the tape under the six PT Cruiser convertible strips will hold for a lifetime and won't cause any damage to the Chrysler.
Six pieces on two doors
The record doesn't say where the six pieces fall or whether any go beyond the doors. The product photos are the guide; sort the pieces and label each liner.
Door bottom condition
The lower edge of each piece follows the door bottom. Look along those edges for bubbling or chips and repair them first.
Cleaning
Wash, rinse and dry. Then wipe the band with isopropyl alcohol until the cloth comes away clean.
Installing
Dry-fit with painter's tape. Peel a few inches of liner, set the bottom edge on the door bottom, and press along as the liner comes off. Finish with firm pressure.
Afterward
Open both doors fully and confirm clearance. Look along the car from the front. Wait a day before washing.
Convertible spacing
On the PT Cruiser, measure piece ends from the door edges so the joints come out even.
Before ordering
Two-door convertible, 2004-2010, and a five-point-two-inch band of steel you like the look of. If all three are right, order; if not, call with a side photo.
Conditions
For the PT Cruiser: dry, mild weather or a garage; parts at room temperature.
Care
Wash with mild soap and a soft mitt and dry the steel afterward.
Supplies
Painter's tape, a tape measure, isopropyl alcohol, a marker, microfiber cloths.
A helper
A second person holding the far end of each piece off the paint makes it easier to set the bottom edge cleanly along the door.
What to send if unsure
Year, body style, and a photo of the full side with the top up or down, whichever shows the doors best.
Timing
Allow a relaxed couple of hours, and check each piece before moving on.
Care
Rinse off road salt in winter, and keep ice scrapers off the polish.
For the PT Cruiser convertible kit TH44705 (UPC 691821577767), phone 877-752-3811.
TH44705 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH44705 |
| UPC | 691821577767 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5.2" |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2010 Chrysler PT Cruiser |
Fitment: TH44705
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler PT Cruiser | 2004-2010 | 2-door, Convertible |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH44705 Rocker Panel Trim, Lower Kit
What does TH44705 fit?
The Chrysler PT Cruiser two-door convertible, 2004-2010.
Does it fit the hatchback?
No, this record names only the convertible.
How wide is it?
5.2", up from the bottom of the door.
How many pieces?
Six.
