Product Description
Chrysler PT Cruiser 2001-2010 Lower Rocker Trim, 5", 8 Pieces (TH41700)
TH41700 is an eight-piece Lower Kit for the Chrysler PT Cruiser, 2001-2010, tagged "4-door, Hatchback." The pieces are polished stainless steel, 5" wide, and they "Span from the bottom of the door UP to the specified width."
Four-door hatchback only
The record names the four-door hatchback. If your PT Cruiser is a different body style, it isn't listed here, so call 877-752-3811 before ordering.
Five inches up the doors
The bottom edge of each piece follows the bottom of the door and the steel rises five inches. Hold a tape measure against a door to see where that lands, then mark it with painter's tape and look from a few steps back.
Linked parts for the same car
- LP41700: one-piece license plate bezel.
- WZ41700: four-piece wheel well fender trim molding.
- WZ41700-AP: four-piece wheel well fender trim molding.
The two wheel well records carry the same tags, and the data doesn't explain how they differ. Ask us if you're choosing between them. Each listing has its own finish details.
Material and mounting
The eight PT Cruiser pieces are polished 26 gauge 304 stainless steel from the USA, fixed to the existing door surface with 3M automotive-grade acrylic foam tape. According to QAA, that tape will hold for a lifetime without harming the 2001-2010 Chrysler.
Eight pieces
No layout comes with the data. Lay the pieces out next to the car, match them to the photos, and number the liners.
Paint condition
Inspect the lower doors in good light. Chips and bubbles in the band should be fixed and fully cured, because the tape holds to whatever surface is there.
Cleaning
Wash with soap and water, rinse, dry fully. Then isopropyl alcohol across the band.
Install
Dry-fit each piece with painter's tape. When the side looks right, peel a few inches of liner, set the bottom edge on the door bottom, and press along as you peel. Finish with firm pressure.
Afterward
Open and close each PT Cruiser door. Sight along the car. Wait a day to wash.
PT Cruiser spacing
Measure piece ends from the door gaps and keep each PT Cruiser position consistent.
Conditions
Fit the PT Cruiser pieces in dry, mild weather or a garage; warm cold parts first.
Care
Wash the PT Cruiser with mild soap and a soft mitt, then towel dry. No abrasive pads.
Before ordering
Check the year falls within 2001-2010, confirm the four-door hatchback, and decide whether five inches of polished steel along the lower doors suits the car. If you're also buying the plate bezel or wheel well trim, mention those SKUs when you call so we can confirm the set together.
What to send if unsure
A photo of the full side, a close-up of a door bottom, and the model year. That's usually enough to answer any fit question in one call.
Timing
Allow a relaxed afternoon. Taking your time over the dry-fit makes it much easier to keep the whole line straight and even from end to end.
PT Cruiser owners can call Quality Automotive Trims at 877-752-3811 about TH41700 (UPC 691821705900).
TH41700 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH41700 |
| UPC | 691821705900 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2001-2010 Chrysler PT Cruiser |
Fitment: TH41700
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler PT Cruiser | 2001-2010 | 4-door, Hatchback |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2001-2010 Chrysler PT Cruiser
- LP41700: 1-piece License Plate Bezel
- WZ41700: 4-piece Wheel Well Fender Trim Molding
- WZ41700-AP: 4-piece Wheel Well Fender Trim Molding
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH41700 Rocker Panel Trim, Lower Kit
What does TH41700 fit?
The Chrysler PT Cruiser four-door hatchback, 2001-2010.
How wide is it?
5", up from the bottom of the door.
What's the difference between WZ41700 and WZ41700-AP?
The data doesn't say. Call 877-752-3811.
How many pieces?
Eight.
