Product Description
Dodge Magnum Wagon 2005-2008 Arrow Side Accent Trim, 14 Pieces of Polished Stainless (AT45920)
The Dodge Magnum was a rare thing, a full-size American performance wagon, and it was only built for four model years. QAA's AT45920 is cut for that car: the 4-door Magnum wagon from 2005 through 2008. It is a fourteen-piece body side molding accent in polished stainless steel, listed by QAA as "Arrow - 1.25" wide." The arrow ends and the wide inch-and-a-quarter profile give the Magnum's long, slab-sided body a strong bright line from front to back.
Fourteen segments along a long wagon
A wagon carries its roofline and body side much farther back than a sedan, and that is a big part of why this kit has fourteen pieces. QAA does not spell out where each segment lands, so we will not either. The product photos show the layout. Use them to picture the finished look before you order and as your map when you install.
Material
Each piece is made in the USA from 26-gauge 304 stainless steel and polished to a mirror shine. Because it is solid stainless, the shine is the metal itself rather than a plated surface. That bright finish complements the Magnum's grille and any chrome already on the car. Grade 304 is a common stainless for exterior trim, and 26 gauge describes the sheet thickness.
Installation
QAA pre-applies 3M automotive-grade acrylic foam tape to every segment. The trim installs directly over the existing surface, so there is no drilling and nothing to remove. QAA states the tape will hold for a lifetime without causing any damage to the surface. For an arrow kit with many segments, alignment is the whole job. Lay the pieces out in order, dry-fit a full run of the Magnum strips, step back to check the line, and only then peel and press. The Installation tab has the full checklist.
Plenty of Magnum trim to match
Few cars this rare have as much QAA trim cataloged. For the same 2005-2008 wagon there is:
- TH45920, a four-piece rocker trim below the door at 2.5", and TH45922, a six-piece side molding insert kit at 1".
- WP45920, a full 14-piece window trim package with upper trim, pillar posts, and sills, plus a separate four-piece window sill set.
- A front end package with a grille accent and fog light rings, a tailgate handle accent ring, and two license plate bezels, one with contoured extensions.
- A rear bumper accent at 6.25", a rear deck accent, a bumper package, and wheel well fender trim moldings.
The TH45922 insert kit also sits in the side molding area, so compare its photos with this kit before buying both. Links to everything are in the Fitment tab.
Fitment
Listed for the 4-door Magnum wagon in 2005, 2006, 2007, and 2008, which is the full production span QAA catalogs. Check the body style column in the Fitment tab as well.
Questions
Call Quality Automotive Trims at 877-752-3811 with your year and part number AT45920, and we will confirm the fit. The UPC and complete specs are in the Specs tab.
AT45920 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT45920 |
| UPC | 691821693382 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 14 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.25" |
| Coverage / notes | Arrow - 1.25" wide |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2008 Dodge Magnum |
Fitment: AT45920
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Magnum | 2005-2008 | 4-door, Wagon |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2008 Dodge Magnum
- BI45920: 4-piece Bumper Package
- DH45920: 1-piece Tailgate Handle Accent Trim Ring
- FP45920: 4-piece Front End Package
- LP45920: 1-piece License Plate Bezel
- LP45921: 1-piece License Plate Bezel
- RB45920: 1-piece Rear Bumper Trim Accent
- RD45920: 1-piece Rear Deck Accent
- SGR45920: 2-piece "POWER WAGON" decal
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 14 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT45920 Body Side Molding Accent Trim
What vehicle does AT45920 fit?
The 2005 to 2008 Dodge Magnum, 4-door wagon.
How wide is the accent?
1.25", in an arrow profile.
How many pieces are in the kit?
Fourteen segments of polished stainless steel.
Is it real stainless steel?
Yes, 26-gauge 304 stainless steel made in the USA.
How does it attach?
Pre-applied 3M acrylic foam tape over the existing surface, no drilling. QAA states the tape will hold for a lifetime without damaging the paint.
Does it overlap with the TH45922 insert kit?
Both are listed for the side molding area. Compare the photos of both listings, or call 877-752-3811 and we will help you decide.
