Product Description
Dodge Magnum Stainless Tailgate Handle Trim Ring, 1 Piece, 2005-2008 (DH45920)
The Dodge Magnum wagon has a deep trim family in the QAA catalog, and DH45920 is the piece that dresses up its rear liftgate handle. It is a single polished stainless trim ring, listed for the 2005-2008 Magnum 4-door wagon, made in the USA from 26-gauge 304 stainless steel, and it installs over the existing surface.
Fitment
Dodge Magnum, 2005 through 2008, four model years, 4-door wagon. That one row is the full listing, and the Fitment tab shows it exactly as QAA records it, along with the related Magnum parts.
Rear-end companions
Several of the linked Magnum parts sit near this ring at the back of the car, which makes them natural partners:
- LP45920, a 1pc license plate bezel, and LP45921, a 1pc license plate bezel noted "With contoured extentions"
- RB45920, a 1pc rear bumper trim accent at 6.25 inches
- RD45920, a 1pc rear deck accent at 2.625 inches
Elsewhere on the Magnum
- AT45920, a 14pc body side molding accent trim, noted "Arrow - 1.25" wide"
- BI45920, a 4pc bumper package, noted as a 0.375" width front and rear insert
- FP45920, a 4pc front end package with grille accent and fog light rings
Six more parts are linked by number only and appear in the Fitment tab.
One piece
The ring is a single piece. The catalog does not give its dimensions or exact outline, so the product photos are the best way to see how it frames the handle.
The steel
Type 304 stainless, a widely used grade, at 26 gauge, polished to a bright, mirror-like finish. The thin sheet lets it sit flush around the handle. Made in the USA.
Installation
With no drilling, the ring goes directly over the existing surface and mounts with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Wash the handle area, degrease it to remove wax and road film, and let it dry. Hold the ring in place with the liner on and check it is centered, then peel and press firmly all the way around. Avoid washing the car or slamming the liftgate for a while so the tape can bond. The Installation tab has the full steps.
Centering tip
A strip of painter's tape on the paint can mark the ring's position once you have it lined up with the liner on. Peel the liner, return to the mark, press, and then remove the guide tape.
Why start here
One piece in one spot makes it the quickest Magnum part to fit, and a simple way to see polished stainless on your paint before the bezels or bumper trim.
Care
Wash and dry the ring with the rest of the car using a soft towel. Avoid abrasive pads and harsh compounds, which can dull polished stainless.
Questions
The Magnum piece is DH45920. Phone 877-752-3811 with any question, and check Specs for the UPC.
DH45920 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DH45920 |
| UPC | 691821581658 |
| Part type | Tailgate Handle Accent Trim Ring |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2008 Dodge Magnum |
Fitment: DH45920
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Magnum | 2005-2008 | 4-door, Wagon |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2008 Dodge Magnum
- AT45920: 14-piece Body Side Molding Accent Trim
- BI45920: 4-piece Bumper Package
- FP45920: 4-piece Front End Package
- LP45920: 1-piece License Plate Bezel
- LP45921: 1-piece License Plate Bezel
- RB45920: 1-piece Rear Bumper Trim Accent
- RD45920: 1-piece Rear Deck Accent
- SGR45920: 2-piece "POWER WAGON" decal
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Tailgate Handle Accent Trim Ring
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DH45920 Tailgate Handle Accent Trim Ring
Which car does DH45920 fit?
The 2005-2008 Dodge Magnum 4-door wagon.
Is this for the doors?
No. It is a single tailgate handle accent trim ring for the rear handle.
Is there matching trim?
Yes. QAA cross-lists license plate bezels, rear bumper and deck trim, body side molding, and front end parts for the Magnum.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
How does it attach?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
