Product Description
Chrysler Pacifica 2004-2008 Upper Rocker Kit, Tapered 4.75"-6" Below the Molding, 8 Pieces (TH44750)
TH44750 is the Upper Kit for the 2004-2008 Chrysler Pacifica four-door SUV. Eight polished stainless steel pieces, with a tapered width of 4.75" to 6", start at the side molding and run down: "Spans from the bottom of the molding DOWN to the specified width."
Three ways to dress the Pacifica's sides
- TH44750 (this one): Upper Kit, eight pieces, 4.75" to 6", from the molding down.
- TH44751: Lower Kit, eight pieces, 6.625" to 7.5", from the door bottom up.
- TH44752: Insert Kit, twelve pieces, on the side molding itself.
The data doesn't say which of these are meant to be combined. If you want more than one, call 877-752-3811 so we can confirm how they meet.
A taper of more than an inch
The band changes from four and three-quarter inches to six inches along its run. The record doesn't say which end is taller. Measure from the molding to the door bottom at the front and back of each door, compare with the photos, and call if anything looks tight.
Other Pacifica trim on the sheet
Pillar posts PP44750, PP44752 and PP44751 (four, six and eight pieces); window trim packages WP44750 ("Includes Upper Trim and Pillar Posts, NO Window Sills") and WP44751 ("Includes Upper Trim, NO Window Sills, NO Pillar Posts"); FV44750 front vent trim; DH44750 tailgate handle ring; GC44750 gas door cover trim; LP44750 plate bezel. Each listing has its own details.
Material
The 2004-2008 Pacifica takes eight tapered strips that QAA forms in the USA out of polished 26 gauge 304 stainless steel, set below the molding with 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime with no harm to the SUV.
Molding
The top edge of each piece meets the molding, which must be straight and firmly attached. It isn't included.
Prep
Wash, rinse, dry, alcohol-wipe the band and the corner under the molding. Repair chips.
Install
Sort the eight pieces with the photos, label the liners, and dry-fit with painter's tape, checking the taper direction. Then peel a few inches of liner, set the top edge against the molding, and press along. Finish with firm pressure.
After
Open each door to check clearance at the bottom. Sight along the top line. Wait a day before washing.
Pacifica door gaps
Measure every Pacifica position from the door gaps and keep it consistent.
Conditions
Fit the Pacifica in dry, mild weather or a garage.
Before ordering
Confirm the year falls within 2004-2008, check the molding along its length, and decide whether you want steel under the molding, on it, or rising from the door bottom. If you're considering two of the three, call 877-752-3811 first so we can check how they meet.
A helper
Someone holding the far end of each piece off the paint keeps the tape clean and the top edge tight to the molding.
Care
Mild soap, a soft mitt, and a towel dry. Rinse off road salt in winter.
Chrysler Pacifica kit TH44750 carries UPC 691821568703; ring Quality Automotive Trims at 877-752-3811.
TH44750 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH44750 |
| UPC | 691821568703 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.75" to 6" tapered |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2008 Chrysler Pacifica |
Fitment: TH44750
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Pacifica | 2004-2008 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2008 Chrysler Pacifica
- DH44750: 1-piece Tailgate Handle Accent Trim Ring
- FV44750: 2-piece Front Vent Trim
- GC44750: 1-piece Gas Door Cover Trim
- LP44750: 1-piece License Plate Bezel
- PP44750: 4-piece Pillar Post Trim
- PP44751: 8-piece Pillar Post Trim
- PP44752: 6-piece Pillar Post Trim
- TH44751: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH44750 Rocker Panel Trim, Upper Kit
What does TH44750 fit?
The Chrysler Pacifica four-door SUV, 2004-2008.
How wide is it?
Tapered, 4.75" to 6", from the bottom of the molding down.
Is there a lower kit?
TH44751, 6.625" to 7.5", from the door bottom up.
How many pieces?
Eight.
