Product Description
Lincoln Zephyr 2006 Stainless Trunk Accent Trim TP46630, Logo Surround, 1 Piece
TP46630 is a one-piece polished stainless steel Trunk Hatch Accent Trim for the 2006 Lincoln Zephyr 4-door sedan. The listing's only placement note is "Logo Surround".
A single model year
The title gives the range as 2006-2006, which means the 2006 model year alone. No other year is listed for this piece.
What "Logo Surround" tells you
The note names the area the trim relates to: the logo on the trunk. The record doesn't give dimensions or say exactly how the piece meets the logo, so compare the photos closely with your own trunk before ordering. If you're unsure, call 877-752-3811.
No linked parts
The record doesn't link any other QAA trim for the Zephyr, so this piece stands on its own.
Construction
- High-quality polished 26 gauge 304 stainless steel
- Made in the USA
- Installs over the existing surface
- 3M automotive-grade acrylic foam tape
For the 2006 Zephyr logo surround, QAA says the tape will hold for a lifetime and won't harm the Lincoln's trunk.
Cleaning around the logo
The edges of the logo need close care. Wash and rinse the trunk, then use a soft brush or cloth to clean around the logo's edges. Let it dry completely. Wipe the bonding area with a wax-and-grease remover and finish with isopropyl alcohol just before fitting.
Dry fit
Hold the piece in position with the liner on. Check that it sits flat and lines up evenly with the logo as in the photos. Mark its edges with a few small strips of painter's tape.
Bonding
- Peel the liner.
- Align the piece with your marks before it touches.
- Set it down in one movement.
- Press firmly over the whole piece and hold.
Once tape makes contact it grabs, so take time over the alignment.
Conditions
Fit on a mild, dry day out of direct sun. Leave the car unwashed for a day.
Care
Mild soap, water and a soft cloth. A non-abrasive stainless cleaner removes fingerprints. Keep scouring pads away from the polish.
Tools
Painter's tape, lint-free cloths, a soft brush, wax-and-grease remover and isopropyl alcohol. Allow around half an hour.
Before ordering
Confirm the car is a 2006 Zephyr sedan and that the photos match your trunk and logo. If the trunk lid or logo has been replaced, call first and describe what you have. When the box arrives, check the piece against the photos before cleaning anything.
Next morning
Look along the edges and press down any spot that has lifted slightly.
Judging the line
With a surround, small offsets are easy to see. During the dry fit, stand back a few paces and look at the gap between the trim and the logo on every side. A helper holding the piece while you look makes this far easier. Adjust until the spacing looks even, then mark it. Store the piece flat in its box until fitting day.
Count the piece and check it for transit marks on arrival.
2006 Zephyr trunk accent TP46630 has UPC 691821494736. Need help? Dial 877-752-3811.
TP46630 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TP46630 |
| UPC | 691821494736 |
| Part type | Trunk Hatch Accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Logo Surround |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006 Lincoln Zephyr |
Fitment: TP46630
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln Zephyr | 2006 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Trunk Hatch Accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TP46630 Trunk Hatch Accent Trim
Which car does TP46630 fit?
The 2006 Lincoln Zephyr 4-door sedan.
Where does it go?
The listing notes "Logo Surround"; the photos show placement.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
How many pieces?
One.
