Product Description
2016-2022 Toyota Prius Hatchback: WS16135 Stainless Window Sill Trim, Four Pieces
WS16135 brings four polished stainless steel window sill pieces to the 2016-2022 Toyota Prius 4-door hatchback. The listing doesn't state a width, so judge the strip size from the product photos.
Years covered
Seven model years, 2016 to 2022, all on the hatchback. An earlier Prius, or a Prius V, Prius C or Prime, isn't on this listing; ring 877-752-3811 with your model to be sure.
Material and mounting
Every piece starts as high-quality 26 gauge 304 stainless steel, is polished, and is made in the USA. Mounting is over the existing surface, using 3M automotive-grade acrylic foam tape. QAA says this tape holds for a lifetime, and that it does so without any damage to the car's surface.
Pick a pillar set if you want one
There's no window package for this Prius, but five pillar sets are listed: PP16135 with four pieces, PP16136 with six, PP16137 with eight, PP16138 with ten and PP16139 with twelve. The photos for each set show which posts it covers.
Rest of the Prius group
RI16135 is a two-piece 1.75" roof insert. AT16135 is a 1" body side molding accent in four pieces, and WQ16135 is a four-piece 0.875" wheel well accent. Also listed: a rear bumper accent, a license plate bezel and a gas door cover.
Before the strips go on
This job is about the sill surface, so take time over it. Raise the windows. Dip a soft cloth in diluted shampoo, wring it nearly dry, and clean along each sill and up to the seal edge. Follow with a clean damp cloth and a dry towel. Then look along each sill with a torch: any shine from wax, residue from a previous accessory, or polish dust needs to come off. A plastic blade lifts residue; wax-and-grease remover clears films. Each sill gets its isopropyl alcohol wipe right before its own piece.
Putting them on
- Hold up all four pieces against the photos and write front-left, front-right, rear-left, rear-right on the liners.
- At the first door, position the piece with painter's tape and confirm the ends.
- Release a short length of liner at the front, press it down firmly, then peel the remaining liner toward the back while pressing behind it.
- Run a thumb along the full length once more.
Once fitted
Give the tape a day to settle before any washing. A gentle soap-and-water wipe keeps the polished finish clear.
Sills and pillars on the same day?
If you order one of the five pillar sets too, decide the order of work before you begin. Pillar pieces go on the door posts, and the photos for WS16135 and for each PP set show how the finished doors look. If it isn't clear which to fit first on your Prius, a quick call to 877-752-3811 settles it. Either way, prepare all the surfaces before peeling any liner, so the job runs without stopping.
Prius owners: call 877-752-3811 about WS16135, UPC 691821250295.
WS16135 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WS16135 |
| UPC | 691821250295 |
| Part type | Window Sill Trim Set |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2022 Toyota Prius |
Fitment: WS16135
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Prius | 2016-2022 | 4-door, Hatchback |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2022 Toyota Prius
- PP16135: 4-piece Pillar Post Trim
- PP16136: 6-piece Pillar Post Trim
- PP16137: 8-piece Pillar Post Trim
- PP16138: 10-piece Pillar Post Trim
- PP16139: 12-piece Pillar Post Trim
- AT16135: 4-piece Body Side Molding Accent Trim
- GC16135: 1-piece Gas Door Cover Trim
- LP16135: 1-piece License Plate Bezel
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Window Sill Trim Set
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WS16135 Window Sill Trim Set
Which Prius years does WS16135 fit?
2016-2022, 4-door hatchback.
Is there a window package?
None is linked. Five pillar sets are listed, PP16135 to PP16139.
Is a width listed?
No; see the photos.
How many pieces?
Four.
