Product Description
Trim Illusion Gloss Black Door Handle Covers for 2021-2026 Toyota Sienna (DH6354BLK)
Trim Illusion's DH6354BLK puts a gloss black finish on the 2021-2026 Toyota Sienna, and it comes as a door handle cover set. Expect eight parts when you open it. Trim Illusion calls the design patented.
It is cataloged for the 2021-2026 Toyota Sienna and nothing else. Other years use different parts.
What to confirm
Doors: 4. Smart key: Works over Keyless Sensor, Rear doors with Smart Key Cut-out. Keyhole: Driver side.
Appearance
Every trip starts by grabbing a door handle. Covering them keeps the look consistent from door to door. A gloss black finish darkens bright trim. Many owners pair it with a sport or night package look.
Complete the look
For a matched Toyota Sienna, see ABS6819BLK (grille overlay, gloss black), MC279 (mirror cover, chrome). Fitment differs by part, so verify each.
How it mounts
Fitting type: snap-on with tape. The shape holds it in place and the tape adds grip. Nothing is removed from the vehicle. ABS plastic is the material.
A normal car wash is all it needs. Not sure it fits? Call us at 877-752-3811. Write down DH6354BLK for your records.
Study the images before you buy. Take your time on alignment.
It keeps the factory parts in place. Expect a box about 13.0 inches long.
Fleet and work-truck owners use trim like this to freshen older units. Expect the job to take less time than a car wash and wax. The finished look is clean and intentional.
Check that the finish is what you expected before you begin. Test the fit before anything is pressed home. A final walk-around confirms everything sits even.
Orders to the lower 48 ship at no charge. Double-check fitment before checkout.
Ownership is simple once it is on. Avoid pressure-washing edges at close range.
Accents work best when they repeat around the vehicle. It is a quick win for the overall appearance.
Hydro-dipping requires removing the parts first. It suits renters of garage space and driveway workers alike.
There is no ongoing upkeep schedule. Use pH-neutral soaps when you can.
Shipping is free within the contiguous United States. Confirming the year and trim first saves time.
Open the box and check the contents against the listing first. Mark reference points with painter's tape if it helps. Take a photo; it is satisfying to compare before and after.
Lease drivers often prefer add-on trim over permanent changes. Basic care and a steady hand are enough. Passersby will notice the change, not the method.
Spray coatings need masking; a molded part does not. This route keeps the factory parts intact.
It gives this spot the same attention as the rest.
DH6354BLK specifications
| Brand | Trim Illusion |
|---|---|
| Part number (MPN) | DH6354BLK |
| UPC | 810101559839 |
| Part type | Door Handle Cover |
| Finish | Gloss Black |
| Fitting type | Snap-on W/Tape |
| Pieces | 8 |
| Material | ABS Plastic |
| Smart key / keyless | Works over Keyless Sensor, Rear doors with Smart Key Cut-out |
| Keyhole | Driver side |
| Doors | 4 |
| Shipping weight | 1.0 lb |
| Package dimensions | 13.0 x 5.0 x 3.0 in |
Fitment: DH6354BLK
| Make | Model | Years |
|---|---|---|
| Toyota | Sienna | 2021-2026 |
Smart key: Works over Keyless Sensor, Rear doors with Smart Key Cut-out. Fitment is listed as Trim Illusion catalogs it. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model and trim.
Installation tips: Door Handle Cover
- Unpack all 8 pieces and match each one to its position using the product photos.
- Clean the mounting area with soapy water, then wipe with isopropyl alcohol and let it dry completely. Wax or dirt will keep the tape from bonding.
- Dry-fit the part over the factory piece to confirm it seats, then remove it.
- Peel the tape liner, line the part up, and press until it snaps into place.
- Press firmly along the taped areas.
- Check the alignment against the photos when finished.
These are general tips. Follow any instructions included with the part if they differ.
FAQ: DH6354BLK Door Handle Cover
Will DH6354BLK fit my Toyota Sienna?
It is cataloged for the 2021-2026 Toyota Sienna. Call 877-752-3811 if yours is not listed.
How many pieces are included?
You get 8 pieces under part number DH6354BLK.
What is the mounting method?
It is snap-on w/tape. Drilling is not part of the job.
Is it metal?
It is ABS plastic, not metal.
What about keyless entry sensors?
Per Trim Illusion: Works over Keyless Sensor, Rear doors with Smart Key Cut-out.
Where can I ask a question?
Phone us at 877-752-3811.
