Product Description
Trim Illusion Gloss Black Window Trim Set for 2018-2024 Toyota Camry (WT6007BLK)
Trim Illusion's WT6007BLK puts a gloss black finish on the 2018-2024 Toyota Camry, and it comes as a window trim kit. It ships as ten separate pieces.
Design notes
This part changes the finish of a piece of trim you see every day. It works on its own, but looks best alongside matching parts. Gloss black gives a deeper, more uniform appearance. It suits black wheels and tinted windows.
Fitment is the 2018-2024 Toyota Camry alone. Your registration shows the model year.
Getting it on
Installation is tape-on, per Trim Illusion. There is no drilling. A clean, dry, wax-free surface is the key step. Material: ABS plastic.
More for this vehicle
For a matched Toyota Camry, see MC6195BLK (mirror cover, gloss black), DH196 (door handle cover, chrome), WC115-16BLK (wheel cover, gloss black). Each has its own fit list.
What to confirm
It is listed for 4-door vehicles.
The shipping box is about 55.0 x 7.0 x 2.0 inches. Have your VIN or trim handy and call 877-752-3811. Avoid scouring compounds on the finish.
There is no body shop visit involved. The photos are the best way to confirm the shape. Have part number WT6007BLK handy when you call.
Avoid installing in extreme cold or heat.
It is aimed at drivers who like a personalized vehicle. Patience matters more than tools here. Passersby will notice the change, not the method.
QAA ships free to the lower 48 states. When in doubt, ask before you buy.
Trim is where many factory cost cuts show. It makes the change visible from the street.
It does not ask for anything beyond normal care. Road salt rinses off easily with plain water.
Paint matching small parts is harder than it sounds. No sanding or primer is involved.
Lay everything out in the order you will install it. Mark reference points with painter's tape if it helps. Finish by checking every edge.
It suits anyone tired of the stock appearance. Basic care and a steady hand are enough. The finished look is clean and intentional.
The eye follows lines of trim around the body. It is an easy place to start.
Unpack carefully and set the parts on a soft surface. A dry run catches problems before they become permanent. Take a photo; it is satisfying to compare before and after.
Shipping is free within the contiguous United States.
Ownership is simple once it is on. Automatic brush washes are harder on trim than hand washing.
No masking or overspray to deal with.
WT6007BLK specifications
| Brand | Trim Illusion |
|---|---|
| Part number (MPN) | WT6007BLK |
| UPC | 810101552670 |
| Part type | Window Trim Set |
| Finish | Gloss Black |
| Fitting type | Tape-on |
| Pieces | 10 |
| Material | ABS Plastic |
| Doors | 4 |
| Shipping weight | 4.0 lb |
| Package dimensions | 55.0 x 7.0 x 2.0 in |
Fitment: WT6007BLK
| Make | Model | Years |
|---|---|---|
| Toyota | Camry | 2018-2024 |
Fitment is listed as Trim Illusion catalogs it. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model and trim.
Installation tips: Window Trim Set
- Unpack all 10 pieces and match each one to its position using the product photos.
- Clean the mounting area with soapy water, then wipe with isopropyl alcohol and let it dry completely. Wax or dirt will keep the tape from bonding.
- Dry-fit the part before removing any tape liner.
- Peel the liner, align carefully, and press firmly along the whole part.
- Avoid washing the vehicle for a day or so while the tape sets.
- Check the alignment against the photos when finished.
These are general tips. Follow any instructions included with the part if they differ.
FAQ: WT6007BLK Window Trim Set
What does WT6007BLK fit?
It is cataloged for the 2018-2024 Toyota Camry. Call 877-752-3811 if yours is not listed.
What is in the package?
You get 10 pieces under part number WT6007BLK.
How is it installed?
Fitting type: Tape-on. Drilling is not part of the job.
What material is it?
ABS plastic.
Who do I call with questions?
Call Quality Automotive Trims at 877-752-3811.
