Product Description
Dodge Charger 2006-2010 Chrome ABS Tail Light Bezels TL46910, 2 Pieces
TL46910 is a two-piece set of chrome Tail Light Bezels for the 2006-2010 Dodge Charger 4-door sedan. The listing describes "High Quality Chrome Plated ABS Plastic - Imported" and calls the part "Tail Light Accent Trim".
Charger trim in the record
QAA links a sizeable group of parts for this sedan:
- DH46910: Door Handle Cover Kit, 8 pieces
- PP46910 and PP46911: Pillar Post Trim, 4 and 6 pieces
- RD46910: Rear Deck Accent, 1 piece, 2.375"
- TH46910: Rocker Panel Trim, On the rocker, 4 pieces, 3.563", installs below the door
- WZ46910: Wheel Well Fender Trim Molding, 4 pieces
- SGB46910 and SGB46911: Grille Accent, 1 and 4 pieces
The record gives only type, count and short notes for them. Their materials aren't given here, so check each listing on its own before planning a matched look.
These bezels
Chrome plated ABS plastic, imported, and "Cut to perfection & Polished to a Mirror Shine," per the listing. Two pieces are included.
Mounting
Both Charger bezels are held by 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime and won't mark the Dodge.
Placement
The record doesn't describe placement in words, so the photos are your reference. Compare them with your Charger's tail lights before ordering, and again before fitting.
Getting the surface clean
Wash around both lights with soapy water and rinse. Dry completely; moisture under tape weakens the bond. Then wipe the contact areas with a wax-and-grease remover, followed by isopropyl alcohol right before each bezel goes on.
Fitting
- Hold each bezel up by hand and confirm which light it belongs to.
- Mark its outline with painter's tape.
- Set the piece on the marks without sliding.
- Press firmly over every taped area.
- Fit the second Charger bezel and compare it with the first.
When to fit
A mild, dry day suits the tape. In cool weather, work in a garage. Wait a day before washing.
Plating care
Use mild soap and a soft cloth. Abrasive pads, polishes and compounds can wear through chrome plating, so keep them away.
Check before buying
A Charger sedan from 2006 to 2010, with tail lights that match the photos. If the lights have been replaced or anything looks different, call us first with your year. Count the two pieces on arrival.
Tools
Painter's tape, lint-free cloths, wax-and-grease remover and isopropyl alcohol. A helper behind the car can confirm both bezels look level before you press the last one down.
If a piece sits unevenly
During the dry fit, if a bezel rocks or leaves a gap, first try it on the other lamp in case the two are mixed up. If it still won't settle where the photos show, stop before mounting and call 877-752-3811. A piece that hasn't been bonded can be looked at again easily. Store both bezels flat until fitting day.
Keep the box until both bezels are on.
Charger owners with part TL46910 (barcode 691821500239) can talk through the install by phoning 877-752-3811.
TL46910 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TL46910 |
| UPC | 691821500239 |
| Part type | Tail Light Bezels |
| Pieces in kit | 2 |
| Material | Chrome Plated ABS plastic |
| Finish | Chrome plated |
| Mounting | 3M automotive-grade acrylic foam tape |
| Origin | Imported |
| Fits | 2006-2010 Dodge Charger |
Fitment: TL46910
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Charger | 2006-2010 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2010 Dodge Charger
- DH46910: 8-piece Door Handle Cover Kit
- PP46910: 4-piece Pillar Post Trim
- PP46911: 6-piece Pillar Post Trim
- RD46910: 1-piece Rear Deck Accent
- TH46910: 4-piece Rocker Panel Trim, On the rocker
- WZ46910: 4-piece Wheel Well Fender Trim Molding
- SGB46910: 1-piece Grille Accent
- SGB46911: 4-piece Grille Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Tail Light Bezels
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TL46910 Tail Light Bezels
Which car does TL46910 fit?
The 2006-2010 Dodge Charger 4-door sedan.
What is it made of?
Chrome plated ABS plastic, imported.
How does it attach?
With 3M automotive-grade acrylic foam tape.
Are there matching Charger parts?
The record links door handle, pillar post, rear deck, rocker, wheel well & grille trim.
