Product Description
Dodge Charger 2006-2010 Rocker Trim, On the Rocker, 3.563", 4 Pieces (TH46910)
TH46910 puts four polished stainless steel pieces on the rockers of a 2006-2010 Dodge Charger four-door sedan. The width is 3.563", a hair over three and a half inches, and the note is "Installs below the door."
The only Charger rocker record here
This record doesn't link another Charger rocker kit, so there's no upper, lower or insert option to compare it with in the group. If you were hoping for trim on the door bottoms rather than the rocker, ask at 877-752-3811 what's available.
Sizing
Measure the flat face of the rocker below each door. The band needs to be clear for the full width. Lay painter's tape at that width along the car and look from both corners; that's your finished line.
The Charger group
Linked accessories include DH46910 door handle covers (eight pieces), PP46910 and PP46911 pillar post kits, RD46910 rear deck accent at 2.375", TL46910 tail light bezels, WZ46910 wheel well fender trim molding, and two grille records: SGB46910, a one-piece grille accent described as "Bentley Style Mesh design Replacement," and SGB46911, a four-piece grille accent. Check each listing for its own details.
Material
The Charger kit is four polished 26 gauge 304 stainless pieces made in the USA. They attach below the doors over the existing surface with 3M automotive-grade acrylic foam tape, and QAA says the tape will hold for a lifetime without harming the Dodge.
Four pieces
The data doesn't assign them to positions. Compare with the product photos and label each liner.
Prep work
Wash the rockers with soapy water and a soft brush, rinse, dry, and finish with isopropyl alcohol. Chips or curb scrapes along the lower edge should be touched up first.
Install
Hold each piece with painter's tape, check it, then peel back a short section of liner and set the leading end. Press along the length as the liner comes free, and finish with firm pressure over all four pieces.
Charger spacing
Use the wheel openings and door openings as reference points to place each piece.
After
Open each door fully. Wait a day before washing, then use mild soap and a soft cloth.
Weather
Pick shelter or a dry, mild day for the Charger.
Before ordering
Charger sedan, 2006-2010, and a clear rocker band of just over three and a half inches. Anything else on the rocker, such as skirts or guards, is worth a photo to 877-752-3811 first.
A helper
Someone holding the far end of each piece makes it easier to keep the line straight on the first try.
What to send if you call
Your year, a photo of a full side from a few feet back, and a close-up of the rocker below the front door with a tape measure held against it. With those we can check the width against your car and answer any questions about the pieces.
Rocker edge
Sight along the lower edge from each end before you start; any wave or ding there will show along the steel.
The Charger part number is TH46910 with barcode UPC 691821612468; questions go to 877-752-3811.
TH46910 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH46910 |
| UPC | 691821612468 |
| Part type | Rocker Panel Trim, On the rocker |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 3.563" |
| Coverage / notes | Installs below the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2010 Dodge Charger |
Fitment: TH46910
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Charger | 2006-2010 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2010 Dodge Charger
- DH46910: 8-piece Door Handle Cover Kit
- PP46910: 4-piece Pillar Post Trim
- PP46911: 6-piece Pillar Post Trim
- RD46910: 1-piece Rear Deck Accent
- TL46910: 2-piece Tail Light Bezels
- WZ46910: 4-piece Wheel Well Fender Trim Molding
- SGB46910: 1-piece Grille Accent
- SGB46911: 4-piece Grille Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, On the rocker
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH46910 Rocker Panel Trim, On the rocker
What does TH46910 fit?
The Dodge Charger four-door sedan, 2006-2010.
Where does it go?
On the rocker below the door, 3.563" wide.
Is there a door-bottom kit?
None is linked to this record. Call 877-752-3811.
How many pieces?
Four.
