Product Description
Dodge Charger 2006-2010 Rear Deck Accent, 2.375-Inch Polished Stainless (RD46910)
This is the rear deck piece in a long list of QAA trim for the Dodge Charger sedan from 2006 to 2010. RD46910 is a single strip of mirror-polished 304 stainless steel, 2.375 inches wide, made in the USA. It sits on the trunk lid over the existing paint and holds with 3M tape. The strip is listed for the 4-door Charger sedan from 2006 through 2010.
Which Charger
The fitment covers the 4-door sedan for model years 2006, 2007, 2008, 2009, and 2010. If the car on your title or registration is a Charger from one of those five years, this strip is cataloged for it.
Plenty to pair with
The data links eight other QAA parts to this car. Everything below is listed for the same Charger sedan:
- DH46910, an eight-piece door handle cover kit
- PP46910 and PP46911, pillar post trim in four and six pieces
- TH46910, a four-piece rocker panel trim that goes on the rocker below the door, 3.563 inches wide
- TL46910, a pair of tail light bezels
- WZ46910, a four-piece wheel well fender trim molding
- SGB46910, a one-piece grille accent described as a Bentley Style Mesh design replacement, and SGB46911, a four-piece grille accent
Around the tail lights
The tail light bezels and this deck accent are the two linked pieces for the back of the car. Ordered together, they dress the lid and the lamps in one install session.
About the width
At 2.375 inches, this is a substantial band rather than a thin pinstripe. Before buying, run a strip of painter's tape that wide across your lid where the photos show the accent, then step back and judge the look.
Steel and adhesive
The strip is 26-gauge 304 stainless with a mirror polish. The shine is the metal itself, not a coating. It mounts with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
Clean first
Wash the lid and let it dry completely. Then wipe the area where the strip will land with a residue-free cleaner, going over it until the cloth shows no wax or road film. Fix chipped or lifting clearcoat before you mount anything.
Placing it
Test the strip with the liner still on. Measure from each end to the edges of the Charger lid, and mark the line with painter's tape. Choose a dry day without heat or cold extremes, peel the liner, and press from the center outward. The Installation tab lists every step.
Afterward
Let the tape settle for a few days before washing. Use mild soap and a soft cloth, skip abrasive polish, and dry the lid after rinsing.
Order notes
Confirm the year and the sedan body. If you plan on several of the parts above, buying them together lets you lay out the whole car at once.
Part details
SKU RD46910, UPC 691821568772. Questions about any of the Charger parts? Call Quality Automotive Trims at 877-752-3811.
RD46910 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD46910 |
| UPC | 691821568772 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2.375" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2010 Dodge Charger |
Fitment: RD46910
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Charger | 2006-2010 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2010 Dodge Charger
- DH46910: 8-piece Door Handle Cover Kit
- PP46910: 4-piece Pillar Post Trim
- PP46911: 6-piece Pillar Post Trim
- TH46910: 4-piece Rocker Panel Trim, On the rocker
- TL46910: 2-piece Tail Light Bezels
- WZ46910: 4-piece Wheel Well Fender Trim Molding
- SGB46910: 1-piece Grille Accent
- SGB46911: 4-piece Grille Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD46910 Rear Deck Accent
Which Charger does RD46910 fit?
The Dodge Charger 4-door sedan, 2006 through 2010.
How wide is the strip?
2.375 inches.
Is there a matching tail light trim?
Yes, TL46910 is a two-piece tail light bezel set for the same sedan.
Does anything on the trunk have to come off?
No. It mounts over the existing surface with 3M tape.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
