Product Description
Toyota 4Runner 2010-2013 Stainless Front Bumper Accent, 1 Piece (FB10177)
FB10177 is a single polished stainless accent for the front bumper of the Toyota 4Runner, listed for the 4-door SUV from 2010 through 2013. It's made in the USA from 304 stainless steel at 26 gauge and mounts with 3M automotive-grade acrylic foam tape.
Front bumper accent, explained
A front bumper accent is a strip or shaped piece of trim that puts a polished line on the bumper's face. The catalog doesn't give dimensions for this one or describe exactly where on the bumper it sits. The product photos show the shape and placement, so compare them with the front of your 4Runner before ordering. If you'd like help confirming, call.
Fitment
One row: Toyota 4Runner, 2010-2013, 4-door SUV. Four model years. The Fitment tab shows the entry. No related 4Runner trim is cross-listed on this sheet.
The material
Type 304 stainless steel, 26 gauge, polished. A thin, workable sheet whose bright finish is the steel's own polished surface.
How it attaches
The accent installs directly over the existing surface using the tape, with no drilling into the bumper. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Bumper prep
The front bumper takes the brunt of bugs, road film and stone dust, so cleaning matters more here than almost anywhere else. Wash the bumper, paying attention to the area where the accent will go. Rinse and degrease, and if a cloth still picks up residue, degrease again. Bug remover may help on stubborn spots, but finish with degreaser so no residue is left. Check the surface for chips or peeling where the tape will sit. Let it dry completely.
Getting it straight
A single front piece is seen head-on, so it needs to be centered and level. With the liner on, hold it in place and stand a few steps in front of the SUV. Measure from a fixed point, such as the edge of the grille or a body line, to each end, and adjust until the two distances match. Mark the ends with painter's tape. Then peel the liner, set the piece to your marks, and press firmly across its full length. Press again a minute later. The Installation tab covers full prep.
Why the front bumper
The front of the vehicle is the face people see first. A polished accent on the bumper brightens it up without changing anything about the bumper itself.
Before ordering
Confirm a 2010-2013 4Runner, compare the photos with your bumper, and check the finish where the piece will go.
A note on temperature
Bumpers can get cold quickly in the shade. If it's cool out, let the bumper warm up first.
Conditions
Install on a mild, dry day out of direct sun, and keep the SUV dry overnight so the tape can settle.
Care
Wash with mild soap and a soft cloth. Avoid abrasive pads and harsh brushes.
Questions
4Runner questions on FB10177 go to 877-752-3811. The 4Runner accent's UPC is listed under Specs.
FB10177 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FB10177 |
| UPC | 691821586585 |
| Part type | Front Bumper Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2013 Toyota 4Runner |
Fitment: FB10177
| Vehicle | Years | Body style |
|---|---|---|
| Toyota 4Runner | 2010-2013 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Front Bumper Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FB10177 Front Bumper Trim
What does FB10177 fit?
The 2010-2013 Toyota 4Runner 4-door SUV.
How many pieces?
One front bumper accent.
What size is it?
The catalog does not list dimensions. Check the photos or call 877-752-3811.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
