Product Description
Toyota Corolla Sedan 2014-2016 Stainless Front Bumper Accent, 1 Piece (FB14112)
FB14112 is one polished stainless accent for the front bumper of the 2014-2016 Toyota Corolla sedan. The piece is 304 stainless steel at 26 gauge, made in the USA, and mounts with 3M automotive-grade acrylic foam tape.
Corolla fitment
The catalog row reads Toyota Corolla, 2014-2016, 4-door Sedan. Three model years, sedan only. Check the Fitment tab for the entry as listed.
What you're getting
A single bumper accent. No dimensions are given, and the catalog doesn't spell out the exact position on the bumper. The product photos show the shape and where it goes; look at them alongside the front of your Corolla. If anything leaves you unsure, a quick call will sort it out.
Pair it with fog light rings
One related listing is cross-referenced for this sedan: ML14112, a two-piece set of fog light surround rings. Since fog lights sit at the front, the rings and this bumper accent work well together for a coordinated front end. Details for the rings are on their own page.
Stainless facts
Type 304, 26 gauge, polished. The brightness is polished into the steel, so there's no plating.
Tape mounting
The accent installs directly over the existing surface. You won't drill the bumper. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Clean first
Front bumpers gather bugs and road film quickly. Wash the bumper and rinse well. Degrease the mounting area, and repeat until a clean cloth shows nothing. If you've used a spray wax or sealant on the bumper, that needs to come off too, since tape bonds poorly to it. Check for chips where the piece will sit. Let the bumper dry completely.
Centering a single piece
With the liner on, hold the accent where the photos show it. Step back several paces in front of the car. Use a tape measure from a fixed point, such as the edge of the grille or a headlight, to each end of the piece, and adjust until both measurements match. Mark both ends with painter's tape. Peel the liner, align to the marks, and press firmly across the whole piece. Give it a second press after a minute. More detail is in the Installation tab.
Why a bumper accent
The front of a car is the first thing people notice. A polished line on the bumper brightens it, and nothing about the bumper changes.
Before ordering
Confirm a 2014-2016 Corolla sedan and compare the photos with your bumper. If you want the fog light rings as well, review ML14112 at the same time.
A cool-weather tip
If the day is cool, let the bumper warm in the sun before you clean it, then move to shade.
Install conditions
A mild, dry day, working in the shade. Keep the car dry overnight.
Care
Mild soap and a soft towel; skip abrasive pads.
Questions
For the Corolla accent, ring 877-752-3811 and mention FB14112; the UPC appears under Specs.
FB14112 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FB14112 |
| UPC | 691821432394 |
| Part type | Front Bumper Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2016 Toyota Corolla |
Fitment: FB14112
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2014-2016 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2016 Toyota Corolla
- ML14112: 2-piece Marker Light Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Front Bumper Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FB14112 Front Bumper Trim
What does FB14112 fit?
The 2014-2016 Toyota Corolla 4-door sedan.
How many pieces?
One front bumper accent.
Is there matching trim?
ML14112, a two-piece set of fog light surround rings, is listed for the same sedan.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
