Product Description
Toyota Corolla 2014-2016 Sedan: 2-Piece Stainless Light Surround Rings (ML14112)
ML14112 is a pair of polished stainless rings for the 2014-2016 Toyota Corolla 4-door sedan. Before anything else, there's a naming point you should know about. The listing title and the category both call these a "Marker Light Accent," but the note on the part reads "Fog Light Surround Rings." Those are two different kinds of lights, and the record uses both names for the same set. We've flagged it for correction. In the meantime, the product photos are the best way to see exactly which lights the rings were cut for, and if your Corolla's lights don't match the photos, call Quality Automotive Trims at 877-752-3811 before you order.
Fitment
Toyota Corolla, 2014, 2015 and 2016, tagged 4-door sedan. The title gives the same years. The Corolla must be a 2014, 2015 or 2016. Corolla prep is set out under Installation.
The parts
Two rings, cut from 26 gauge 304 stainless steel with a polished finish, made in the USA. The part type in the catalog is "Marker Light Accent." There's no width or diameter in the record, so compare the photos with your car rather than relying on a number.
Mounting
3M automotive-grade acrylic foam tape, installed directly over the existing surface. You won't drill, and the lights stay where they are. Corolla fit questions can go to 877-752-3811.
Getting a pair to look like a pair
With two rings, even spacing is everything. Clean the area around each light with soapy water, dry it, and wipe with rubbing alcohol. Then dry-fit both rings with their liners on before you peel either one. Step back and look at the Corolla from straight ahead and from each front corner. Is the margin around each lens even? Do the two rings sit at the same angle? Adjust until they match each other, then mark a reference point on the body next to each ring with a small piece of painter's tape. Peel one liner, set the ring to its mark, and press around its full edge with your fingertips, keeping pressure off the lens. Fit the second ring and check again from a few steps back.
Before you order
- Your car is a 2014-2016 Corolla sedan with four doors.
- The lights on your car match the ones in the product photos.
- The surface around each light is clean and sound, with nothing chipped or loose that would sit under the tape.
- You've read the naming note above and know which lights you're dressing.
Timing
A dry day in the temperature range listed in the Installation tab gives the tape the best start. Let it cure as that tab describes before the first wash.
Also on this sheet
FB14112 is a 1-piece front bumper trim, tagged for the same 4-door sedan. That's the only other part cross-listed here. If you're planning more trim for this Corolla, ask us what else is available.
Care
Clean with mild soap, water and a soft cloth. Keep abrasive pads off polished stainless.
ML14112 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | ML14112 |
| UPC | 691821638437 |
| Part type | Marker Light Accent |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Fog Light Surround Rings |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2016 Toyota Corolla |
Fitment: ML14112
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2014-2016 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2016 Toyota Corolla
- FB14112: 1-piece Front Bumper Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Marker Light Accent
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: ML14112 Marker Light Accent
Are these for the marker lights or the fog lights?
The title says marker light accent but the note says fog light surround rings. Check the photos or call 877-752-3811.
Which Corolla is ML14112 tagged for?
The 2014-2016 Toyota Corolla 4-door sedan.
How many pieces?
Two rings.
Does installing them mean removing the lights?
No. They mount with 3M automotive-grade acrylic foam tape directly over the existing surface.
What material are they?
Polished 26 gauge 304 stainless steel, made in the USA.
