Product Description
Chevrolet Traverse 2009-2012 Stainless Fog Light Surround Trim, 2 Pieces (FV49165)
FV49165 is a pair of polished stainless surrounds for the fog light area of the Chevrolet Traverse SUV, 2009 through 2012. The title and part type list it as a front vent accent, and the included-items line as fog light trim, with the bullet "Surround." It's made in the USA from 304 stainless steel at 26 gauge.
A two-piece surround
"Surround" means the trim outlines the opening rather than covering it. The catalog lists two pieces but doesn't state how they divide or give dimensions. Check the product photos against your Traverse. The naming difference between the title and the included-items line is flagged for review; it doesn't change the part. Both vent accents are stainless steel.
Fitment
Chevrolet Traverse, 2009-2012, 4-door SUV. One row; the Fitment tab has it.
Front and rear Traverse trim
For the front:
- SG49165, a two-piece front grille accent, logo extension inserts.
For the rear:
- DH49165, a one-piece tailgate handle accent trim ring.
- DH49166, a one-piece tailgate handle cover with no key hole or camera access.
- RD49166, a rear lid accent at 3.
The two tailgate handle pieces differ: one is a ring, the other a cover without key hole or camera access. If your Traverse has a camera or keyhole at the handle, keep that note in mind.
Material
Polished 304 stainless at 26 gauge, bright because the steel itself is polished.
Mounting
On the 2009-2012 Traverse, both vent surrounds mount with 3M automotive-grade acrylic foam tape over the existing surface, without drilling. Per QAA, the tape holds for a lifetime and won't harm the SUV's surface.
Clean the fog light area
Low-mounted openings gather bugs, sand and road film along their edges. Use soapy water and a soft brush, rinse well, and wipe the mounting surface with degreaser. A second pass is worth it here. Get into the corners with a swab. Let everything dry.
Install
Fit one vent accent first. With the liner still on, place the surround around the opening and check that it sits evenly all the way around. Mark a few points with painter's tape. Peel the liner, align, and press firmly around the full piece, then again after a minute. Use the first as your reference for the second. The Installation tab covers prep.
Why surrounds
Outlining the fog lights gives the Traverse's lower front a polished frame and leaves the lights unchanged.
Checklist
- Traverse, 2009-2012.
- Photos match your fog light area.
- Surface is clean and sound.
Keeping a ring even
A surround is judged by the gap between it and the opening. Look for an even reveal all the way around before you press. If the border looks wider at one edge, slide the piece slightly while the liner is still on. It's much easier to correct now than after the tape touches.
Conditions
Mild and dry, out of direct sun. Keep it dry overnight.
Care
Mild soap and a soft brush or towel.
Questions
Traverse vent questions about FV49165 go to 877-752-3811; Specs shows the UPC.
FV49165 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FV49165 |
| UPC | 691821401291 |
| Part type | Front Vent Accent |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2012 Chevrolet Traverse |
Fitment: FV49165
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Traverse | 2009-2012 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2012 Chevrolet Traverse
- DH49165: 1-piece Tailgate Handle Accent Trim Ring
- RD49166: 1-piece Rear Deck Accent
- SG49165: 2-piece Front Grille Accent Trim
- DH49166: 1-piece Tailgate Handle Cover
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Front Vent Accent
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FV49165 Front Vent Accent
What does FV49165 fit?
The 2009-2012 Chevrolet Traverse 4-door SUV.
How many pieces?
Two surround pieces.
Is it vent trim or fog light trim?
The title and part type call it a front vent accent; the included-items line says fog light trim with a surround design.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
