Product Description
Chevrolet Traverse Stainless Tailgate Handle Accent Ring, 1 Piece, 2009-2012 (DH49165)
DH49165 is a single polished stainless ring that frames the rear handle on the 2009-2012 Chevrolet Traverse, cataloged as a 4-door SUV. It is made in the USA from 26-gauge 304 stainless steel and installs over the existing surface.
Ring or cover?
QAA lists two rear handle parts for this Traverse, and they are different part types:
- DH49165 (this part): a tailgate handle accent trim ring in polished stainless steel, made in the USA
- DH49166: a tailgate handle cover in chrome-plated ABS plastic, noted "No key hole or camera access"
The ring outlines the handle area in metal, while the cover is a molded chrome piece over the handle area. Compare the photos of both to pick the look you want.
Fitment
Chevrolet Traverse, 2009 through 2012, four model years, 4-door SUV. The Fitment tab shows the row and the related Traverse parts.
Traverse trim to pair with it
- FV49165, a 2pc fog light trim set
- RD49166, a 1pc rear deck accent at 3 inches
- SG49165, a 2pc front grille accent trim, noted "Logo Extension Inserts"
The rear deck accent is the natural partner, since it sits on the same part of the vehicle as this ring.
Polished 304
Type 304 is a widely used stainless grade. QAA forms it at 26 gauge so it sits flush, then polishes it to a mirror-like finish.
One piece to place
The catalog does not give the ring's dimensions or outline, so check the product photos to see how it frames the handle.
Installation
For the 2009-2012 Traverse, the ring mounts with 3M automotive-grade acrylic foam tape over the existing surface, without drilling. QAA says the tape holds for a lifetime with no damage to the Chevrolet's surface.
- Wash around the rear handle.
- Degrease to remove wax and road film, then dry.
- Center the ring with the liner on, checking from directly behind the SUV.
- Peel and press firmly all the way around.
Avoid washing or closing the liftgate hard for a while. The Installation tab has full steps.
Marking the position
A strip of painter's tape on the paint beside the ring can mark the right spot while the liner is still on. After peeling, line the ring back up with the mark, press it down, and remove the guide tape.
Why the rear handle
The liftgate handle is used whenever cargo goes in or out and sits in the center of the rear view. A bright stainless ring gives it a finished look in a few minutes.
Conditions
Work on a dry, mild day in the shade. The rear of an SUV collects road spray in every seam, so give the area around the handle a second degreaser pass before setting the tape, and let the vehicle sit overnight before it sees rain.
Care
Wash the Traverse's ring with the rest of the SUV, dry it with a soft towel, and keep abrasive pads away.
Questions
The Traverse tailgate trim is DH49165. For questions, call 877-752-3811, and check Specs for the UPC.
DH49165 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DH49165 |
| UPC | 691821606047 |
| Part type | Tailgate Handle Accent Trim Ring |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2012 Chevrolet Traverse |
Fitment: DH49165
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Traverse | 2009-2012 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2012 Chevrolet Traverse
- FV49165: 2-piece Front Vent Accent
- RD49166: 1-piece Rear Deck Accent
- SG49165: 2-piece Front Grille Accent Trim
- DH49166: 1-piece Tailgate Handle Cover
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Tailgate Handle Accent Trim Ring
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DH49165 Tailgate Handle Accent Trim Ring
Which vehicle does DH49165 fit?
The 2009-2012 Chevrolet Traverse 4-door SUV.
How is it different from DH49166?
DH49165 is a stainless accent ring. DH49166 is a chrome-plated ABS cover with no key hole or camera access.
How many pieces?
One.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
How does it attach?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
