Product Description
Ford Fusion Sedan 2006-2009 Stainless Front Vent Accent, 2 Pieces (FV46390)
FV46390 is a two-piece polished stainless accent for the front vents of the 2006-2009 Ford Fusion sedan. QAA makes it in the USA from 304 stainless steel at 26 gauge, and each piece mounts with 3M automotive-grade acrylic foam tape.
Front and back of the same car
This sheet cross-lists three more Fusion parts, and they happen to be for the opposite end of the car:
- ET46390, a one-piece exhaust trim at 2.48.
- LB46390, a license bar for above the plate, with logo cut out.
- LP46390, a license plate bezel at 7.88.
Vent accents at the front and one or more of these at the back give the Fusion polished details at both ends.
Fitment
Ford Fusion, 2006-2009, 4-door Sedan. One row. See the Fitment tab.
About the two pieces
The catalog doesn't name the exact vents, give dimensions or describe the shape. The product photos are the reference; hold them up against your Fusion's front end. If they don't match what you see, call before you buy.
What it's made from
Type 304 stainless at 26 gauge, polished. It follows a contour closely, and it's bright because the steel is polished; the photos show how each piece frames its vent on the Fusion.
No drilling
The Fusion's two vent accents fit over the existing surface. According to QAA, the tape holds for a lifetime with no damage to the vehicle's surface.
Clean, then clean again
Vents catch bugs and grime in their slots and edges. Wash with soapy water and a soft brush, rinse, then degrease. Do a second degrease pass and check that the cloth stays clean. Swabs help with narrow gaps. Dry completely before anything else.
Fitting
Try each piece in place with the liner still on. Look at it from the front of the car, not just from beside it. Once you're happy, outline it with a few bits of painter's tape. Peel, line up, press firmly over the full surface, and press again a minute later. Do the second piece, then step back to see both together. The Installation tab has the full prep routine.
Why vent accents
Vents are a design feature of the front end. A polished accent makes them stand out and leaves them working as before.
Pre-order list
- 2006-2009 Fusion sedan.
- Photos match your vents.
- Surface around them is in good shape.
Planning front and rear together
If you're ordering the vent accents along with the license bar or bezel, you can do the whole car in one afternoon. Start at the front while you're fresh, since the vents involve more careful cleaning. The rear pieces go on quickly after that. Each part goes on independently, though, so there's no need to do them all at once; the rear pieces can wait.
Install weather
Mild and dry, out of the sun. Keep the car dry overnight.
Upkeep
Soft brush, mild soap.
Questions
Fusion owners can reach Quality Automotive Trims on 877-752-3811 about FV46390; the UPC is printed on Specs.
FV46390 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FV46390 |
| UPC | 641606026720 |
| Part type | Front Vent Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2009 Ford Fusion |
Fitment: FV46390
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2006-2009 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2009 Ford Fusion
- ET46390: 1-piece Exhaust Trim Package
- LB46390: 1-piece License Bar, Above plate accent Trim
- LP46390: 1-piece License Plate Bezel
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Front Vent Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FV46390 Front Vent Trim
What does FV46390 fit?
The 2006-2009 Ford Fusion 4-door sedan.
How many pieces?
Two front vent accents.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
Is there matching rear trim?
Yes. ET46390 exhaust trim, LB46390 license bar and LP46390 license plate bezel are listed for the same Fusion.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
