Product Description
Ford Fusion 2006-2009 Stainless License Plate Bezel, 7.88" (LP46390)
LP46390 is a single polished stainless License Plate Bezel for the Ford Fusion 4-door sedan, cataloged for 2006, 2007, 2008 and 2009. The row has no trim exclusions. Made in the USA from 26-gauge 304 stainless steel with a mirror finish, it frames the plate area, and the listing gives a width of 7.88".
Bezel, bar or both
The Fusion sheet also lists LB46390, a one-piece License Bar, Above plate accent Trim noted With Logo Cut Out. The bar is cataloged as an accent above the plate; LP46390 outlines the plate area itself. The logo cut out note belongs to the bar. This bezel's listing has no notes, so it doesn't say either way whether the bezel has openings. If you plan to fit both, look at the two sets of product photos side by side to judge the spacing, and call Quality Automotive Trims at 877-752-3811 if you're unsure; mention LP46390 and LB46390.
What the 7.88" means
We don't know exactly. The catalog gives 7.88" Width without saying which dimension it is, and we've flagged it. Use the photos for the outline and treat the number as a supporting reference. Compare the photos with the area around your plate, including any lock, emblem or lighting.
Mounting
3M automotive-grade acrylic foam tape bonds the bezel directly over the existing surface; no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. On a sedan built between 2006 and 2009, repair chips or lifting clear coat around the plate first, and remove old adhesive. Wash, dry and wipe with rubbing alcohol. Dry-fit with the liner on, mark the spot with painter's tape, then peel and press firmly around the frame. The Installation tab lists the temperature range.
Two more Fusion parts
ET46390 is a one-piece Exhaust Trim Package at 2.48", and FV46390 a two-piece Front Vent Trim. Neither of those is cataloged for the plate area, so they don't compete with the bezel; they're simply other stainless options for the same Fusion. All four parts on this sheet carry the same 4-door sedan tag. Check each listing for its finish.
Order of work, if you're doing both
Prep the whole rear area once. Hold the bezel and the bar up together with their liners on and the plate loosely refitted, so you can see the gap between them. Fit the bezel first, then the bar, checking the spacing again before the second liner comes off.
A one-piece job
On its own, the bezel is a short project with no joints to align. Cleaning takes most of the time; the placement is one careful press once the dry fit looks right.
Before ordering
A Fusion sedan from 2006 to 2009 is what your records should name. If you use a plate frame, try it during the dry fit to see whether it overlaps the bezel.
Care
Mild soap and water and a soft towel keep the polish bright. Avoid abrasive pads.
LP46390 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP46390 |
| UPC | 691821543397 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.88" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2009 Ford Fusion |
Fitment: LP46390
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2006-2009 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2009 Ford Fusion
- ET46390: 1-piece Exhaust Trim Package
- FV46390: 2-piece Front Vent Trim
- LB46390: 1-piece License Bar, Above plate accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP46390 License Plate Bezel
Which Fusion does LP46390 fit?
The 2006-2009 Ford Fusion 4-door sedan.
What's the difference from LB46390?
LB46390 is a License Bar above the plate with a logo cut out. LP46390 is the bezel that frames the plate area.
What does the 7.88" width measure?
The catalog doesn't say which dimension. See the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
