Product Description
Ford Fusion 2013-2018 Stainless License Plate Bezel (LP53390)
Six model years of the Ford Fusion 4-door sedan, 2013 through 2018, share one fitment row for LP53390. It's a single stainless License Plate Bezel, and the row has no trim restrictions or footnotes. Two other parts are cross-listed for the same sedan, both cataloged for the back of the car, which makes this bezel a natural starting point for anyone dressing up that end.
Those two are RB53390, a one-piece Rear Bumper Trim Accent, and RD53390, a one-piece Rear Deck Accent. Neither listing gives a width on this sheet, and none of the three records says how the pieces sit relative to each other. That's not a problem, just a reason to plan. If you buy more than one, hold all of them up during the dry fit and judge them together from behind the Fusion before the tape touches anything. Each listing describes its own finish and mounting.
Q: What exactly is the bezel made of? One piece of 304 stainless steel, 26 gauge, polished to a mirror finish and made in the USA. Stainless doesn't need plating to shine, so there's no coating to fail. The catalog doesn't list dimensions, so the product photos are the guide to shape and outline.
Q: How does it go on? The Fusion bezel mounts with 3M automotive-grade acrylic foam tape over the existing surface, with no drilling. According to QAA, the tape will hold for a lifetime, and the Fusion's surface won't be damaged.
Q: What should I check first? The paint. Tape can only hold to a surface that's holding to the car, so repair chips or lifting clear coat around the plate before you start. Remove old frame or sticker adhesive, wash with soap and water, and let it dry. A wipe with rubbing alcohol finishes the prep by removing wax and film.
Q: How do I get it straight? Dry fit with the backing on. Hold the bezel in place, step back several paces, and shift it until it looks centered. Put a few short strips of painter's tape at its edges as guides. Peel, align, press firmly around the perimeter and pull the guide strips. The Installation tab gives the steps in order and the temperature range the tape needs.
Q: Anything else? Stand by your Fusion with the product photos open and check the year matches 2013 to 2018. If you use a plate frame, try it at the dry fit. Clean the bezel with mild soap, water and a soft cloth; abrasive pads can dull the polish. Since it's one piece with no hardware, most of your time goes into preparation rather than the install itself.
For anything the page doesn't answer, call Quality Automotive Trims at 877-752-3811 and mention LP53390, plus RB53390 or RD53390 if you're considering them too.
Timing matters a little: a dry, mild day suits the tape best, and the bond benefits from being left alone for a while before the first wash.
LP53390 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP53390 |
| UPC | 691821410835 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2018 Ford Fusion |
Fitment: LP53390
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2013-2018 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2018 Ford Fusion
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP53390 License Plate Bezel
Which Fusion years does LP53390 fit?
The 2013 through 2018 Ford Fusion 4-door sedan.
What else is listed for the Fusion?
RB53390, a one-piece rear bumper trim, and RD53390, a one-piece rear deck accent.
Can I install all three together?
They're listed for the same sedan. Dry fit them together first, or call 877-752-3811.
How is the bezel attached?
With 3M automotive-grade acrylic foam tape directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Does it have a plated finish?
No. It's polished 26-gauge 304 stainless steel.
