Product Description
Ford Fusion 2013-2018 Rear Deck Accent, Polished Stainless (RD53390)
RD53390 is the trunk lid strip for the Ford Fusion sedan, model years 2013 through 2018. One piece of mirror-polished 304 stainless steel, made in the USA, with 3M tape. The catalog gives no width or length for this piece. The accent is listed for the 4-door Fusion sedan, model years 2013 through 2018.
Fusion years
2013, 2014, 2015, 2016, 2017, 2018. 4-door sedan.
Sizing without a number
With no dimensions on record, the photos are your guide. Pull one up on your phone, stand behind your Fusion, and compare where the strip starts and stops against the edges and badge of your trunk. For a measurement, call before ordering.
The three-part rear
Two other parts are linked, and both are for the back of the car:
- LP53390, a license plate bezel
- RB53390, a rear bumper trim accent
Neither lists a width either. Fitted together with this strip, they put trim at three levels on the rear: the lid, the plate, and the bumper.
Order of work
Mount the trunk strip first. Then place the bezel and bumper accent, checking from a few steps back so the gaps look even. Leaving their liners on during that check lets you shift them freely until the spacing between all three looks deliberate and level.
What's in the strip
26-gauge 304 stainless steel, polished to a mirror finish. No plating; the shine is the metal itself.
How it mounts
Fusion owners mount this accent on the existing surface with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harming the sedan.
Clean before you stick
Wash the lid and dry it. Then wipe the strip's footprint with a residue-free cleaner, switching to a fresh cloth until it comes away clean. Waxes and sealants weaken foam tape, so be thorough. Repair any peeling clearcoat first.
Find the position
Keep the liner on and hold the strip in place against the photos. Measure from each end to the lid edges, even them out, and lay painter's tape along the line.
Mount it
Pick a dry, mild day, or work in a garage. Peel the liner and press from the center toward both ends with firm pressure. The Installation tab lists the steps.
After
Let the bond settle for a few days before washing. Mild soap and a soft cloth from then on.
Why stainless
Solid 304 stainless has no coating that could peel, and a light scuff shows the same steel.
Purpose
A deck accent is purely decorative. It does not replace a factory part, and the trunk works as before.
Light for the job
Even, indirect light makes it easier to judge whether the strip is level. Avoid working with the sun low behind the car, which hides the edges.
Before ordering
Confirm your year and sedan body, compare the photos with your trunk, and decide whether you want the bezel and bumper piece too.
Part details
For a Fusion measurement, call Quality Automotive Trims at 877-752-3811. Accent RD53390, UPC 691821615315.
RD53390 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD53390 |
| UPC | 691821615315 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2018 Ford Fusion |
Fitment: RD53390
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2013-2018 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2018 Ford Fusion
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD53390 Rear Deck Accent
Which Fusion does RD53390 fit?
The Ford Fusion 4-door sedan, 2013 through 2018.
How wide is it?
No width is listed. Call for a measurement.
Are there matching rear parts?
Yes, LP53390 (plate bezel) and RB53390 (rear bumper accent).
Is any trim removed from the lid first?
No. It uses 3M tape.
Is it one piece?
Yes.
