Product Description
Ford Edge 2015-2018 Rear Deck Accent, 1.25-Inch Polished Stainless (RD55610)
RD55610 fits the Ford Edge 4-door SUV from 2015 to 2018. It's a 1.25-inch strip of mirror-polished 304 stainless steel that goes across the liftgate, one piece, made in the USA. It mounts with 3M tape.
Edge years
2015, 2016, 2017, 2018. An Edge from before this range uses a different listing.
A small rear set
Three other parts are linked:
- RB55610, a rear bumper trim accent
- LP55610, a license plate bezel
- GC55610, a gas door cover trim
The first two go on the back with this strip, giving you trim on the gate, around the plate, and at the bumper. Neither lists a width.
On the liftgate
QAA files this as a rear deck accent. The Edge has a liftgate, and that's where the strip sits; the photos show the spot.
An inch and a quarter
A moderate band. Painter's tape cut to 1.25 inches and placed where the photos put the strip gives you a real-life preview.
Built from
26-gauge 304 stainless, mirror-polished. The bright surface is the steel itself.
Bonded with
For the Edge, 3M automotive-grade acrylic foam tape holds the 1.25" accent on the existing surface. According to QAA, it will hold for a lifetime without harming the Ford.
Clean the gate
Wash, dry, and then go over the strip's path with a residue-free cleaner. Repeat with a clean cloth until it picks up nothing. Old wax and road film are the main reasons tape lets go. Repair chips before you begin.
Spacing three pieces
If you bought the bezel and bumper accent too, hold all three up with liners on. Settle the deck strip's position first, measuring from each end to the gate edges, and mark it with painter's tape.
Applying
Choose a dry, mild day. Peel the liner and press from the center outward with firm pressure. Then fit the bezel and the bumper piece. The Installation tab has more.
Care
No washing for a few days. After that, mild soap and a soft cloth, never abrasive polish.
What it is
Decorative trim for the rear. It doesn't replace any factory part.
No side trim linked
This Edge record links no pillar, rocker, or wheel well parts. For trim elsewhere on the vehicle, call and ask what's available.
Install conditions
Work in shade or a garage. A gate warmed by direct sun or chilled overnight won't give the foam tape its best start, and even light makes it easier to see whether the strip is level.
Sizing the other pieces
Since the bumper accent and bezel have no listed widths, use their photos to picture the stack. If you want actual measurements for either before ordering, a quick call can get them for you.
Why stainless
Solid 304 stainless has no plated layer, so a light scuff from cargo loading shows the same steel.
Before ordering
Confirm the year, and decide whether you want just the strip or the full rear set.
Part details
Ford Edge accent RD55610 (UPC 691821325702): call Quality Automotive Trims at 877-752-3811.
RD55610 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD55610 |
| UPC | 691821325702 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.25" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2015-2018 Ford Edge |
Fitment: RD55610
| Vehicle | Years | Body style |
|---|---|---|
| Ford Edge | 2015-2018 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2015-2018 Ford Edge
- GC55610: 1-piece Gas Door Cover Trim
- RB55610: 1-piece Rear Bumper Trim Accent
- LP55610: 1-piece License Plate Bezel
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD55610 Rear Deck Accent
Which Edge does RD55610 fit?
The Ford Edge 4-door SUV, 2015 through 2018.
How wide is it?
1.25 inches.
Where does it go?
On the rear liftgate.
Is there a matching bumper accent?
Yes, RB55610, plus LP55610, a plate bezel.
Does the trunk need any parts taken off?
No. It uses 3M tape.
