Product Description
Ford Edge 2015-2018 Stainless License Plate Bezel (LP55610)
LP55610 gives the plate area of a Ford Edge a polished stainless frame. One row lists it for the Edge 4-door SUV, 2015 through 2018, with no exclusions or further notes. It is one piece, and the product title says the same thing as the fitment data, so the usual title-versus-row confusion doesn't come up here.
Three companions are linked for the same SUV. GC55610 is a one-piece Gas Door Cover Trim. RB55610 is a one-piece Rear Bumper Trim Accent. RD55610 is a single part at 1.25" that the catalog calls a "Rear Deck Accent." The record doesn't say exactly where the piece goes on the Edge, so look at its photos before deciding, and hold it next to the bezel first if you buy both. Each of the three listings covers its own finish and mounting.
Sharing the Edge's rear view with the bezel are the bumper accent and the deck accent. If you buy any of them together, it pays to stage them all before the adhesive comes into play: hold each in place and look at the group from behind the SUV. That way spacing decisions get made once, with everything visible.
LP55610 itself is 26-gauge 304 stainless steel, mirror polished and made in the USA. Stainless keeps its shine without plating, which means no top coat to scuff through. No dimensions appear on the record, so the photos are your guide; compare them with your own plate area and note anything close by that the bezel would need to clear.
Fastening is by 3M automotive-grade acrylic foam tape directly over the existing surface, which keeps drills and screws out of the picture. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. The adhesive can't outperform the paint it's stuck to, so look closely at the finish around the plate. Chipped spots or clear coat that's begun to peel should be repaired before the job.
When the paint is sound, clean thoroughly. Scrape off any glue left by an old frame or dealer badge, then wash with soap and water. Once it's completely dry, a pass with rubbing alcohol removes the last of the wax. Position the bezel with its liner still attached and judge it from several paces back. A few short pieces of painter's tape at the corners record the spot. Peel, set it against those guides and press firmly everywhere along the perimeter. The Installation tab gives the order of work and the temperature range the tape needs.
Make sure the Edge is a 2015 to 2018 model. Test any plate frame during staging. A soft cloth, mild soap and water keep the polish clean. Call Quality Automotive Trims at 877-752-3811 and quote LP55610 with any question, including where RD55610 is meant to sit.
With one piece and no hardware, the install itself goes quickly; plan most of your time for the cleaning and the staging.
LP55610 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP55610 |
| UPC | 691821587155 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2015-2018 Ford Edge |
Fitment: LP55610
| Vehicle | Years | Body style |
|---|---|---|
| Ford Edge | 2015-2018 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2015-2018 Ford Edge
- GC55610: 1-piece Gas Door Cover Trim
- RB55610: 1-piece Rear Bumper Trim Accent
- RD55610: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP55610 License Plate Bezel
Which Ford Edge does LP55610 fit?
The Edge 4-door SUV, 2015 through 2018.
What is RD55610?
A one-piece trim at 1.25" that the catalog names Rear Deck Accent. Check its photos or call 877-752-3811.
Is drilling needed?
No. It's held with 3M automotive-grade acrylic foam tape directly over the existing surface.
Can I install it with the RB55610 bumper accent?
Both are listed for the Edge. Stage them together before installing either.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
