Product Description
2015-2018 Ford Edge Rear Bumper Accent, One-Piece Mirror Stainless (RB55610)
RB55610 is a one-piece rear bumper accent for the Ford Edge 4-door SUV, model years 2015 through 2018. It is cut from 304 stainless steel, mirror polished, and made in the USA. 3M tape holds it to the existing bumper surface.
Fitment
The record covers the 4-door SUV for 2015, 2016, 2017, and 2018. An Edge outside those years is not on this listing.
Three linked pieces
QAA keeps the Edge lineup short:
- RD55610, a one-piece rear deck accent with a listed width of 1.25 inches
- LP55610, a license plate bezel
- GC55610, a gas door cover
All three are one-piece items, and two of them sit at the very back of the SUV alongside this bumper accent, so a complete rear takes only a few minutes of installing once the prep is done.
Why the rear is the place to start
The rear bumper is the surface following drivers see most. A single polished line there is a simple upgrade that changes the look of the vehicle without touching paint or body panels.
What it is
Decorative bright trim that adheres to the bumper cover. The bumper stays as it is.
Material notes
The accent is 26-gauge 304 stainless steel with a mirror polish. The shine is the metal itself, so there is nothing plated that can lift or fade with washing.
Attachment
On the Edge, the accent is fixed with 3M automotive-grade acrylic foam tape and sits on the current bumper surface. According to QAA, the tape lasts a lifetime without surface damage.
Bumper prep
Rear bumpers on SUVs pick up road film and scuffs from loading cargo. Wash the area with soapy water, rinse, and dry. Then wipe the mounting zone with a residue-free cleaner. Repair any scrapes where the strip will sit so the tape lies flat.
Placement
Dry-fit the accent with its liner on and compare to the product photos. Measure from both ends to the bumper corners until the numbers match, then mark the line with masking tape. If you are installing the deck accent and bezel too, do those first and use them to check that the bumper piece is centered.
Install
Choose a dry, mild day. Peel the liner, line it up, and press firmly from the middle toward each end. Give the tape a few days before washing. Full steps are on the Installation tab.
Care
Mild soap and a soft cloth. No abrasive pads or rubbing compounds on the polished face.
Cargo and the bumper
If you often slide items over the rear bumper while loading, plan the accent's position with that in mind and keep the area clean afterward. Grit dragged across a mirror finish will scratch it. A quick rinse after loading dusty gear keeps the polish clear.
Finishing the set
Because each Edge piece is a single item, ordering the deck accent and bezel with this one lets you prep once and install all three in one afternoon.
Part details
SKU RB55610, UPC 691821664672. Call Quality Automotive Trims at 877-752-3811 with any Edge fitment questions.
RB55610 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB55610 |
| UPC | 691821664672 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2015-2018 Ford Edge |
Fitment: RB55610
| Vehicle | Years | Body style |
|---|---|---|
| Ford Edge | 2015-2018 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2015-2018 Ford Edge
- GC55610: 1-piece Gas Door Cover Trim
- LP55610: 1-piece License Plate Bezel
- RD55610: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB55610 Rear Bumper Trim Accent
Which Ford Edge does RB55610 fit?
The 4-door Ford Edge SUV, 2015 through 2018.
How many pieces?
One.
What rear trim pairs with it?
RD55610 rear deck accent, LP55610 license plate bezel, and GC55610 gas door cover.
Is the bumper removed to fit it?
No. It mounts with 3M automotive-grade acrylic foam tape over the existing surface.
What is it made of?
26-gauge 304 stainless steel with a mirror polish, made in the USA.
