Product Description
Ford Edge 2007-2014 Stainless License Plate Bezel, 7.6" (LP47360)
LP47360 is a one-piece polished stainless License Plate Bezel for the Ford Edge 4-door SUV, cataloged for eight model years, 2007 through 2014. The row carries no trim exclusions. It's made in the USA from 26-gauge 304 stainless steel with a mirror finish, and the listing includes a width of 7.6".
The Limited note is on another part
One of the Edge parts on this sheet has a trim restriction, and it's easy to assume it applies to everything. TP47360, a three-piece Trunk Hatch Accent Trim, is noted Does not fit the 2011-2012 "Limited" model. That note is on TP47360's listing only. The bezel's row lists the Edge 4-door SUV from 2007 to 2014 without any such exclusion, so a 2011 or 2012 Limited is not excluded from LP47360 by that note. If you own one and want both parts, call Quality Automotive Trims at 877-752-3811 about the hatch trim before ordering it.
About the 7.6" width
The catalog doesn't say which dimension the 7.6" describes, and we've flagged it. Use the product photos as the main reference for the outline, and compare them with the area around your plate, including any lock, handle, emblem or lighting. Call with SKU LP47360 if you'd like the measurement explained.
Mounting
The bezel installs directly over the existing surface with 3M automotive-grade acrylic foam tape; no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Repair chips or lifting clear coat around the plate, remove old adhesive, then wash, dry and wipe with rubbing alcohol. Dry-fit with the liner on, mark with painter's tape and press firmly. The Installation tab gives the steps and temperature range.
Other Edge parts
RD47360 is a one-piece Rear Deck Accent at 1.13", cataloged, like the hatch trim and this bezel, for the rear of the SUV. WS47360 is an eight-piece window sill trim set. If you're considering more than one rear part, hold them up together with their liners on before installing any. Check each listing for its finish.
A sensible first piece
The bezel is one piece in one spot and doesn't carry the hatch trim's Limited restriction, which makes it the straightforward place to start on any Edge from these years.
On the day
Choose a dry day within the temperature range, and work in shade so the surface isn't hot. Have soap and water, rubbing alcohol, clean microfiber cloths, painter's tape and a plastic scraper on hand, plus a screwdriver for the plate. Give the dry fit most of your attention: once the liner is off and the foam touches the paint, it grips quickly, so the position you marked is the position you'll keep.
Before you order
Check your paperwork for an Edge from 2007 to 2014. If you use a plate frame, refit it during the dry fit to check that it doesn't overlap the bezel.
Care
Mild soap and water, then a soft towel. Leave abrasive pads out.
LP47360 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP47360 |
| UPC | 641606030024 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.6" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2014 Ford Edge |
Fitment: LP47360
| Vehicle | Years | Body style |
|---|---|---|
| Ford Edge | 2007-2014 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2014 Ford Edge
- RD47360: 1-piece Rear Deck Accent
- TP47360: 3-piece Trunk Hatch Accent Trim
- WS47360: 8-piece Window Sill Trim Set
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP47360 License Plate Bezel
Does LP47360 fit the 2011-2012 Edge Limited?
The bezel's row has no trim exclusion. The Limited restriction is on the TP47360 hatch trim.
Which Edge years are covered?
2007 through 2014, 4-door SUV.
What does the 7.6" width measure?
The catalog doesn't say which dimension. See the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
