Product Description
Lincoln Navigator 2007-2014 Stainless License Plate Bezel (LP47655)
LP47655 covers eight model years of the Lincoln Navigator 4-door SUV, 2007 through 2014, on a single fitment row with no trim exclusions. It's a one-piece License Plate Bezel in mirror-polished 26-gauge 304 stainless steel, made in the USA, and it frames the plate area.
The bar with the logo cut out
Only one other Navigator part is cross-listed here: LB47655, a one-piece License Bar, Above plate accent Trim noted With Logo Cut Out. The bar is cataloged above the plate; this bezel outlines the plate area. The logo cut out note belongs to the bar. The bezel's own listing has no notes, so it says nothing either way about openings. If you're considering both pieces, open both sets of product photos and look at them together against your Navigator's rear, then hold the actual parts up with their liners on before installing either. Questions go to Quality Automotive Trims at 877-752-3811; mention LP47655 and LB47655.
Outline and fit
No dimensions or cutouts are listed for the bezel. With eight model years on one row, take a careful look at the area around your own plate, including any lock, handle, emblem or lighting, and compare it with the photos before you order.
How it goes on
The bezel installs directly over the existing surface with 3M automotive-grade acrylic foam tape, so there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Begin with the paint: touch up chips, repair lifting clear coat, and scrape away residue from old frames or dealer stickers. Wash, rinse, dry and wipe with rubbing alcohol. Hold the bezel in place, liner on, and look from behind until it's centered, then mark it with painter's tape. Peel, place on the marks, and press firmly around the frame. A second pass a minute later helps. The Installation tab lists the temperature range.
If you fit both
Prep the whole rear area at once. Fit the bezel first, since it frames the plate and sets the reference, then position the bar relative to it, checking the gap with the plate loosely in place before the bar's liner comes off.
What you'll need
Soap and water, rubbing alcohol, a few clean microfiber cloths, painter's tape, a plastic scraper for old residue, and a screwdriver for the plate. The bezel mounts with 3M automotive-grade acrylic foam tape and needs no hardware. Work on a dry day within the temperature range, out of direct sun.
Material
Grade 304 is a common chromium-nickel stainless for exterior trim, and the thin 26-gauge sheet sits close to the surface once it's taped.
Year check
A Navigator between 2007 and 2014 should show in your records.
Plate frames
If you use one, refit it during the dry fit. You'll see immediately whether it covers the bezel's edge.
Care
Mild soap and water and a soft towel keep the polish bright. Scouring pads and gritty compounds leave fine scratches, so avoid them.
LP47655 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP47655 |
| UPC | 641606030055 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2014 Lincoln Navigator |
Fitment: LP47655
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln Navigator | 2007-2014 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2014 Lincoln Navigator
- LB47655: 1-piece License Bar, Above plate accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP47655 License Plate Bezel
Which Navigator does LP47655 fit?
The 2007-2014 Lincoln Navigator 4-door SUV.
Does the bezel have a logo cut out?
Its listing doesn't say. The logo cut out note is on LB47655, the license bar. Check the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are dimensions listed?
No. Use the photos.
How many pieces?
One.
