Product Description
2007-2009 Mitsubishi Outlander Stainless License Plate Bezel (LP27010)
For a 2007, 2008 or 2009 Mitsubishi Outlander 4-door SUV, LP27010 is the License Plate Bezel in the catalog. The fitment row covers just those three model years with no trim exclusions. It is one piece of 26-gauge 304 stainless steel, made in the USA, with a mirror-polished face that frames the plate area.
Three years is a short window, so check your records first. If your Outlander is a year outside that range, this listing doesn't cover it, and a quick call to Quality Automotive Trims at 877-752-3811 is the way to find out what does.
Shape and size
No dimensions are listed for this bezel, and the notes don't mention cutouts. The product photos are therefore the guide. Compare the outline with the area around your plate, including any lock, emblem, handle or lighting, and call with SKU LP27010 if the shapes don't match.
How it's applied
The bezel installs directly over the existing surface with 3M automotive-grade acrylic foam tape, so there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. On an SUV from these years, start with the paint: touch up chips and repair clear coat that's lifting, and clean off any residue from old frames or stickers. Remove the plate, wash, rinse and dry, then wipe with rubbing alcohol. Hold the bezel in place with the liner on, check from behind that the margins are even, and set painter's tape along its edges as guides. Peel, align, and press firmly around the frame, then press again a minute later. Follow the temperature range on the Installation tab.
Outlander parts and a decal with a note to watch
TH27010 is a two-piece rocker trim at 2.7" that Installs below the door. TH27011 is a four-piece lower kit at 1.5" that Spans from the bottom of the molding DOWN to the specified width. DS27010 is a four-piece door sill trim that Includes "Outlander" Logo Cut Out. GC27010 is a one-piece gas door cover trim, and PP27010 and PP27011 are pillar post kits of four and six pieces. SGR27010 is listed as a four-piece "OUTLANDER" Logo Decal, but its notes read All one piece and Logo emblem, Set of Two, and "BOSTON" and Clover, which don't agree with each other or with the name. We've flagged it; call before ordering that decal. WP27010, WQ27010 and WS27010 are cross-listed by number only. Check each listing for its finish.
A low-risk first piece
The bezel is one piece in one spot, which makes it the easiest of these jobs and a good way to see polished stainless against your Outlander's paint before going further.
Frames and care
If you keep a frame on the plate, refit it during the dry fit to make sure it clears the bezel. Wash the stainless with mild soap and water and dry with a soft towel; skip abrasive pads. Keep LP27010 to hand when you phone.
LP27010 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP27010 |
| UPC | 641606029615 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2009 Mitsubishi Outlander |
Fitment: LP27010
| Vehicle | Years | Body style |
|---|---|---|
| Mitsubishi Outlander | 2007-2009 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2009 Mitsubishi Outlander
- DS27010: 4-piece Door Sill trim
- GC27010: 1-piece Gas Door Cover Trim
- PP27010: 4-piece Pillar Post Trim
- PP27011: 6-piece Pillar Post Trim
- SGR27010: 4-piece "OUTLANDER" Logo Decal
- TH27010: 2-piece Rocker Panel Trim, On the rocker
- TH27011: 4-piece Rocker Panel Trim, Lower Kit
- WP27010: 10-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP27010 License Plate Bezel
Which Outlander years does LP27010 fit?
2007, 2008 and 2009, 4-door SUV.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are dimensions listed?
No. Use the photos or call 877-752-3811.
Is there trim with the Outlander name?
DS27010, a four-piece door sill trim, includes an "Outlander" logo cut out.
How many pieces?
One bezel.
