Product Description
Saturn Aura 2007-2009 Stainless License Plate Bezel (LP47415)
LP47415 fits the Saturn Aura 4-door sedan for model years 2007, 2008 and 2009. Those three years are the whole fitment row, sedan only, with no trim exclusions. The bezel is one piece, cut from 26-gauge 304 stainless steel, mirror polished and made in the USA, and it outlines the plate area.
Start by confirming the year. A three-year listing leaves little room, so check your records for 2007, 2008 or 2009. Then check the shape. The catalog doesn't list dimensions or cutouts for this bezel, which makes the product photos the reference. Compare them with the area around your Aura's plate, including any lock, emblem or lighting. If either check leaves a doubt, call Quality Automotive Trims at 877-752-3811 and mention LP47415.
Install
Fitting the Aura bezel means pressing it over the existing surface on 3M automotive-grade acrylic foam tape, no drill involved. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Look the paint over first and repair chips or clear coat that's lifting. Remove old adhesive with a plastic tool, then wash, rinse, dry and wipe with rubbing alcohol. Dry-fit with the liner on and look from behind the car until it's centered, mark the spot with painter's tape, then peel and press firmly around the frame twice. The Installation tab lists the temperature range.
Aura parts on the same sheet
The other Aura listings all sit along the sides. TH47415 is an eight-piece lower rocker kit at 2", noted W/ trim crease, that spans from the bottom of the door up to the specified width. Pillar post kits come in three sizes: PP47415 with four pieces, PP47416 with six and PP47417 with eight. GC47415 is a one-piece gas door cover trim. None of them is cataloged for the rear, so the bezel is the only plate-area part on this sheet. Check each listing for its finish.
Choosing a pillar kit later
If you like the bezel and want to carry polished stainless up to the glass, the three pillar kits differ in piece count, and the catalog doesn't spell out which pillars each one covers. The photos on each listing are the best guide, and a call can settle it.
The crease on the rocker kit
TH47415's crease note belongs to that rocker kit. The bezel's listing has no shape notes at all.
Why start with one piece
There are no joints to line up and no separate parts to sort. Most of the job is cleaning, and the placement itself is one press. That makes it a practical first project, and it shows you how your Aura's paint takes the foam tape before you try an eight-piece kit.
Plate frame
If you keep one, refit it during the dry fit to make sure it doesn't overlap the bezel. Decide which look you prefer while the tape is still covered.
Upkeep
Wash with mild soap and water and dry with a soft towel. Steel wool and scouring pads scratch a mirror finish.
LP47415 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP47415 |
| UPC | 691821744664 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2009 Saturn Aura |
Fitment: LP47415
| Vehicle | Years | Body style |
|---|---|---|
| Saturn Aura | 2007-2009 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2009 Saturn Aura
- GC47415: 1-piece Gas Door Cover Trim
- PP47415: 4-piece Pillar Post Trim
- PP47416: 6-piece Pillar Post Trim
- PP47417: 8-piece Pillar Post Trim
- TH47415: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP47415 License Plate Bezel
Which Aura does LP47415 fit?
The 2007-2009 Saturn Aura 4-door sedan.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are dimensions listed?
No. Use the photos or call 877-752-3811.
Are there other rear parts for the Aura?
None are cross-listed on this sheet. The other parts are rocker, pillar and gas door trim.
How many pieces?
One.
