Product Description
Mitsubishi Outlander 2007-2009 Stainless Door Sill Trim with "Outlander" Logo Cut Out, 4 Pieces (DS27010)
The name is cut right into the steel. DS27010 is a four-piece set of polished stainless door sill trims for the Mitsubishi Outlander SUV, 2007 through 2009, and the catalog notes it includes an "Outlander" logo cut out. The plates are 304 stainless at 26 gauge and made in the USA.
About the logo
The note reads: Includes "Outlander" Logo Cut Out. The catalog doesn't say whether every plate carries the name or only some, so check the product photos to see where the cut out appears. Call if you want to confirm before you order.
Fitment
One row: Mitsubishi Outlander, 2007-2009, 4-door SUV. Three model years. The Fitment tab shows the entry.
Sills and what they are
Each door opening has a sill at the bottom, the threshold you step across to get in. A sill trim plate covers that surface. Four pieces for four doors gives each opening a plate, though the catalog doesn't spell out the exact mapping.
Other Outlander listings
The same SUV has a range of cross-referenced trim:
- GC27010, gas door cover trim, one piece.
- LP27010, license plate bezel, one piece.
- PP27010 and PP27011, pillar post trims in four and six pieces.
- TH27010, a two-piece rocker trim that installs below the door, width 2.7.
- TH27011, a four-piece lower rocker kit spanning from the bottom of the molding down to a width of 1.5.
- SGR27010, listed as a four-piece "OUTLANDER" logo decal.
The SGR27010 line carries odd notes ("BOSTON" and Clover), which we've flagged for review, so call before ordering that one. WP27010, WQ27010 and WS27010 are listed too, with details on their own pages.
Steel and mounting
Polished 304 stainless steel, 26 gauge. The plates install directly over the existing surface with 3M automotive-grade acrylic foam tape, so there's nothing to drill. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Preparing four sills
Vacuum each sill, then wash, rinse and degrease. Remove any vinyl dressing or protectant completely, since the tape won't hold well over it. Let everything dry.
Placement
Open a door and hold its plate in position with the liner still on. Make sure the logo reads the right way and sits where you want it. Mark the ends with painter's tape, peel, align to the marks, and press firmly along the length. Press again after a minute. Finish the front pair before moving to the rear. The Installation tab has full prep steps.
Why a named sill
The sill is what greets you when a door opens. With the model name cut into polished steel, the opening looks finished and personal, and the plate sits flat, so the doors close as they always have.
Checklist
Confirm a 2007-2009 Outlander, review the photos for logo placement, and clean the sills well.
First day
Until the following day, step over the Outlander's new sill plates rather than on them, and fit them in mild, dry weather.
Care
Mild soap, water, soft towel. No abrasives.
Questions
Call Quality Automotive Trims at 877-752-3811 and mention DS27010. UPC is in the Specs tab.
DS27010 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DS27010 |
| UPC | 691821559398 |
| Part type | Door Sill trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Includes "Outlander" Logo Cut Out |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2009 Mitsubishi Outlander |
Fitment: DS27010
| Vehicle | Years | Body style |
|---|---|---|
| Mitsubishi Outlander | 2007-2009 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2009 Mitsubishi Outlander
- GC27010: 1-piece Gas Door Cover Trim
- LP27010: 1-piece License Plate Bezel
- PP27010: 4-piece Pillar Post Trim
- PP27011: 6-piece Pillar Post Trim
- SGR27010: 4-piece "OUTLANDER" Logo Decal
- TH27010: 2-piece Rocker Panel Trim, On the rocker
- TH27011: 4-piece Rocker Panel Trim, Lower Kit
- WP27010: 10-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Door Sill trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DS27010 Door Sill trim
What does DS27010 fit?
The 2007-2009 Mitsubishi Outlander 4-door SUV.
Does it have the Outlander name?
Yes. The catalog notes it includes an "Outlander" logo cut out. See the photos for placement.
How many pieces?
Four door sill trims.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it require drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
