Product Description
TP47360 Ford Edge 2007-2014 Stainless Trunk Hatch Accent Trim, 3 Pieces
TP47360 is a three-piece polished stainless steel Trunk Hatch Accent Trim for the 2007-2014 Ford Edge 4-door SUV. The listing carries an important exclusion: "Does not fit the 2011-2012 "Limited" model".
The Limited exclusion
The fitment covers 2007-2014, but the note rules out the Limited for 2011 and 2012. If your Edge is a Limited from either of those years, this set isn't listed for it. The record doesn't mention any other trim level. If you're not sure of your Edge's trim, check your paperwork or call 877-752-3811 before ordering.
Linked Edge trim
- RD47360: Rear Deck Accent, 1 piece, 1.13"
- LP47360: License Plate Bezel, 1 piece, 7.6"
- WS47360: Window Sill Trim Set, 8 pieces
The record doesn't repeat the Limited exclusion on those parts. Check each listing's own notes before ordering them for a 2011-2012 Limited.
Material and mounting
The three Edge trunk pieces are polished 26 gauge 304 stainless steel from the USA, applied over the existing liftgate with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harming the 2007-2014 Ford.
Three pieces to place
The record doesn't list where each of the three goes. Lay them out when the box arrives, compare them with the photos, and work out the order before cleaning. If one can't be placed, call us.
Preparation
Wash, rinse and dry the hatch fully. Use a wax-and-grease remover on all the bonding areas, then isopropyl alcohol right before each piece goes on.
Dry fit
- Hold all three pieces in place with the liners on.
- Mark the ends of each with painter's tape.
- Check the gaps between pieces look even.
- Open and close the Edge hatch to confirm clearance.
Bonding
Fit the pieces one at a time, starting with the one that sets the position for the others. Peel the liner in short lengths, press as you go, and finish with firm pressure.
Conditions
Mild, dry weather in shade. Leave the hatch unwashed for a day.
Care
Mild soap and a soft cloth, plus a non-abrasive stainless cleaner for fingerprints.
Tools
Painter's tape, lint-free cloths, wax-and-grease remover and isopropyl alcohol. A helper can judge the level from behind the SUV.
Checklist
An Edge from 2007 to 2014, not a 2011-2012 Limited, with a hatch matching the photos. Count all three pieces on arrival.
Fitting three pieces evenly
The gaps between the three pieces matter as much as their height. Measure the gaps during the dry fit with a ruler and match them to the spacing in the photos. Step back from the SUV after placing the first piece and again after the second, before peeling the last liner. If any piece looks out of line during the dry fit, move it and re-mark it before its liner comes off. Store the pieces flat until fitting day, and press down any raised edge the next morning.
Order TP47360 (UPC 691821528783) for the three-piece 2007-2014 Edge trunk set, and call 877-752-3811 with any fit doubts.
TP47360 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TP47360 |
| UPC | 691821528783 |
| Part type | Trunk Hatch Accent Trim |
| Pieces in kit | 3 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Does not fit the 2011-2012 "Limited" model |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2014 Ford Edge |
Fitment: TP47360
| Vehicle | Years | Body style |
|---|---|---|
| Ford Edge | 2007-2014 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2014 Ford Edge
- LP47360: 1-piece License Plate Bezel
- RD47360: 1-piece Rear Deck Accent
- WS47360: 8-piece Window Sill Trim Set
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Trunk Hatch Accent Trim
- Unpack all 3 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TP47360 Trunk Hatch Accent Trim
Which Edge does TP47360 fit?
The 2007-2014 Ford Edge 4-door SUV, except the 2011-2012 Limited.
Does it fit a 2011 Limited?
No. The listing says it does not fit the 2011-2012 Limited.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
How many pieces?
Three.
