Product Description
Ford Fusion 2010-2012 Stainless License Plate Bezel (LP50390)
Three of the parts listed for the 2010-2012 Ford Fusion sedan sit at the back of the car, and this is one of them. LP50390 is the License Plate Bezel: a single piece of polished 26-gauge 304 stainless steel, made in the USA, that frames the plate area. It's cataloged for the Fusion 4-door sedan from 2010 through 2012, with no trim tags or notes on the row.
Bezel, bar and bumper trim
The other two rear pieces are LB50390, a one-piece License Bar, Above plate accent Trim, and RB50390, a one-piece Rear Bumper Trim Accent. The bar's name places it above the plate. The bezel surrounds it. The bumper trim's listing gives no width or position note beyond its name, so its photos are where to see it.
Because all three are cataloged for the same sedan, it's natural to consider them together. What the catalog doesn't spell out is how each one's edges relate to the others once fitted. If you're planning two or all three, hold each one in place before installing any, and look at them as a group from behind the car. Quality Automotive Trims can help at 877-752-3811; give the SKU numbers when you call.
Elsewhere on the Fusion
ML50390 is a two-piece Accent Trim noted Front Marker Light Surround rings, and FV50390 is a two-piece Front Vent Trim. MI50390 is a four-piece Body Molding Insert Trim Kit at 1". Those notes belong to their parts. For their finish and mounting, read their own listings.
Mounting
Nothing is drilled. The bezel mounts with 3M automotive-grade acrylic foam tape and goes directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Inspect the paint around the plate first, and have chips or lifting clear coat repaired. Strip old adhesive, wash, dry and wipe with rubbing alcohol. Then dry-fit, tape off the position, peel, and press it on firmly. The Installation tab lists each step with the temperature range.
Order of work
If more than one rear part is going on, the bezel is a reasonable one to fit first. It's a single piece that frames the plate, so it gives you a fixed reference for judging the others. Leave it a day, look at it in daylight, and then decide whether the bar or the bumper trim belongs next to it on your Fusion.
The metal
Grade 304 stainless gets its corrosion resistance from the alloy rather than a plated layer, so there's nothing on the surface to flake. At 26 gauge, it lies close to the surface beneath it.
Checking the order
Your records should show a 2010, 2011 or 2012 Fusion. Compare the product photos with the area around your plate, and if something there looks different, call before ordering with SKU LP50390.
Afterward
Fit your plate frame, if you use one, during the dry fit to be sure it clears the bezel. Mild soap, water and a soft cloth are all the polish needs.
LP50390 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP50390 |
| UPC | 691821414529 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2012 Ford Fusion |
Fitment: LP50390
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2010-2012 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2012 Ford Fusion
- FV50390: 2-piece Front Vent Trim
- LB50390: 1-piece License Bar, Above plate accent Trim
- MI50390: 4-piece Body Molding Insert Trim Kit
- ML50390: 2-piece Accent Trim
- RB50390: 1-piece Rear Bumper Trim Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP50390 License Plate Bezel
Which Fusion years does LP50390 fit?
2010 through 2012, 4-door sedan.
Is the bezel the same as LB50390?
No. LB50390 is a one-piece license bar named for the area above the plate. The bezel surrounds the plate area.
Can I fit the bezel, bar and bumper trim together?
All three are cataloged for the same sedan, but the catalog doesn't describe how they meet. Dry-fit them together or call 877-752-3811.
How is it attached?
3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
