Product Description
Ford Fusion 2010-2012 Sedan: Front Marker Light Surround Rings, 2-Piece Stainless (ML50390)
The note on ML50390 reads "Front Marker Light Surround rings," which tells you the job in one line: two polished stainless rings that frame the front marker lights on a 2010-2012 Ford Fusion 4-door sedan. The title calls the part a Marker Light Accent, and the catalog part type is Accent Trim. The record doesn't give a ring size, so the product photos are your guide to shape and fit.
Fitment
Ford Fusion, 2010, 2011 and 2012, 4-door, sedan. That's the only row, and the title matches it. The Fusion listing covers 2010 through 2012. If your Fusion falls outside those years, the lights may not match; call Quality Automotive Trims at 877-752-3811 with ML50390 and we'll help you check. Give ML50390 when calling 877-752-3811 about the Fusion.
Construction
Both rings are 26 gauge 304 stainless steel, polished, and made in the USA. They attach with 3M automotive-grade acrylic foam tape, installed directly over the existing surface. That means no drilling and no removing the lights. See the Installation tab for Fusion prep.
What to check on the car first
Look at each front marker light and the surface around it. You're checking for three things: a lens or housing that's cracked or loose, paint around the edge that's chipped or flaking, and old wax or polish residue. Fix the first two of those before any trim goes on. The third comes off with soapy water followed by a rubbing alcohol wipe. Let the alcohol flash off before you continue.
Fitting two rings so they match
Hold each ring in place with its liner on and look at it straight on. Adjust until the gap around the lens is even, then put a small piece of painter's tape beside it as a reference. Compare the two rings from the front of the car; they should look the same. Peel one liner, align the ring to your mark, and press around its full edge with your fingertips, staying off the lens. Repeat on the second light. Work on a dry day inside the temperature range in the Installation tab, and wait the cure time it lists before washing.
Building out the Fusion
This sheet lists several more parts for the same sedan. FV50390 is a 2-piece front vent trim, which you might fit on the same afternoon since you'll already be working at the front. MI50390 is a 4-piece body molding insert kit at 1 inch. LB50390 is a 1-piece license bar, an above-plate accent trim, and LP50390 is a 1-piece license plate bezel. RB50390 is a 1-piece rear bumper trim accent. Each of those has its own listing, so check the fitment tags and photos there before ordering any of them.
Caring for polished stainless
Wash with mild soap and water and dry with a soft cloth. Avoid steel wool, abrasive pads and gritty compounds, which leave scratches in the polish. Questions about ML50390 can go to 877-752-3811.
ML50390 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | ML50390 |
| UPC | 691821277032 |
| Part type | Accent Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Front Marker Light Surround rings |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2012 Ford Fusion |
Fitment: ML50390
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2010-2012 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2012 Ford Fusion
- FV50390: 2-piece Front Vent Trim
- LB50390: 1-piece License Bar, Above plate accent Trim
- LP50390: 1-piece License Plate Bezel
- MI50390: 4-piece Body Molding Insert Trim Kit
- RB50390: 1-piece Rear Bumper Trim Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Accent Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: ML50390 Accent Trim
Which lights are these rings for?
The front marker lights, according to the note.
What Fusion is ML50390 tagged for?
The 2010-2012 Ford Fusion 4-door sedan.
How many pieces are in the set?
Two rings.
Do I need to drill or remove anything?
No. They mount with 3M automotive-grade acrylic foam tape directly over the existing surface.
What size are they?
No size is listed. Compare the photos or call 877-752-3811.
