Product Description
Ford Fusion Sedan 2010-2012 Rear Bumper Accent, Mirror-Polished Steel (RB50390)
RB50390 is QAA's rear bumper accent for the Ford Fusion 4-door sedan, model years 2010, 2011, and 2012. It is a single strip of 304 stainless steel with a mirror polish, made in the USA, and it attaches with 3M tape over the bumper's existing finish.
A short, three-year window
This record covers just three model years. QAA keeps a different rear bumper accent for the later Fusion, so it pays to confirm your year before you order. The registration or the label in the door jamb will tell you.
What is linked to this Fusion
The catalog pairs this sedan with a handful of other stainless pieces, front and back:
- LB50390, a license bar above the plate
- LP50390, a license plate bezel
- MI50390, a four-piece body molding insert kit, one inch wide
- FV50390, a two-piece front vent trim
- ML50390, two front marker light surround rings
There is no rear deck accent linked for these years, so the license bar and bezel are the pieces that sit closest to this one.
Building the rear look
The license bar sits above the plate and the bezel frames it. Put this bumper accent below and the back of the sedan gets three trim elements stacked in a column; check each listing for its finish. Install the bezel and bar first, then center the bumper strip under them.
What the accent is
A decorative strip that bonds to the face of the rear bumper cover. It does not change, replace, or cut into the bumper.
Steel spec
26-gauge 304 stainless steel, polished to a mirror. Since the finish is the metal and not a plated coating, it will not peel or blister.
Mounting
For the Fusion, the accent sticks with 3M automotive-grade acrylic foam tape and sits on the current bumper surface. According to QAA, the tape keeps hold for a lifetime and leaves the Ford undamaged.
Prep for a sedan of this age
A Fusion from these years has seen plenty of washes, waxes, and road grime. Clean the bumper with soapy water, dry it completely, and wipe the mounting area with a residue-free cleaner. Repair any chips or scrapes before installing.
Install sequence
Hold the strip in place with the liner on and compare its position to the product photos. Measure each end against fixed points on the Fusion bumper and adjust until it sits where the photos show. Mark the line with masking tape. On a dry, mild day, peel the liner and press firmly from the center out. Avoid washing for a few days. The Installation tab has the full guide.
Care
Mild soap and a soft cloth keep it bright. Skip abrasive pads.
Front and rear in one order
Because the vent trim and marker light rings dress the front while this accent and the plate pieces dress the back, ordering several at once gives the car a consistent look at both ends. Each piece has its own listing with photos.
Part details
SKU RB50390, UPC 691821266548. Not sure if your Fusion is a 2012 or newer? Call Quality Automotive Trims at 877-752-3811.
RB50390 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB50390 |
| UPC | 691821266548 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2012 Ford Fusion |
Fitment: RB50390
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2010-2012 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2012 Ford Fusion
- FV50390: 2-piece Front Vent Trim
- LB50390: 1-piece License Bar, Above plate accent Trim
- LP50390: 1-piece License Plate Bezel
- MI50390: 4-piece Body Molding Insert Trim Kit
- ML50390: 2-piece Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB50390 Rear Bumper Trim Accent
Which Fusion does RB50390 fit?
The Ford Fusion 4-door sedan, 2010 through 2012.
Does it fit a later Fusion?
No. QAA lists a separate rear bumper accent for later years.
How many pieces?
One.
What rear trim pairs with it?
LB50390 license bar and LP50390 license plate bezel.
How does it attach?
With 3M automotive-grade acrylic foam tape over the existing surface.
