Product Description
Ford Fusion Sedan 2006-2012 Arrow Side Molding Accent, 12-Piece Polished Stainless (AT50390)
On a 2006 through 2012 Ford Fusion sedan, a little brightwork along the doors can do a lot of work. QAA's AT50390 is a twelve-piece body side molding accent for the 4-door Fusion over those seven model years. QAA describes it as "Arrow - 1" wide," so the polished stainless accent is an inch across and finishes in pointed tips, giving the side of the car a sharper, more purposeful look.
What the arrow profile adds
A plain strip is a line. An arrow accent has direction: the pointed ends lead the eye along the body. Across twelve pieces, QAA shaped the design to follow the Fusion's sides. The catalog does not say where each segment goes, so the product photos are the best reference. Look at them before you order, and keep them handy while you install.
Seven model years
QAA lists this kit for the 4-door Fusion sedan in 2006, 2007, 2008, 2009, 2010, 2011, and 2012. If your car is a Fusion sedan from that span, it is covered. The Fitment tab shows the row exactly as QAA catalogs it, with the body style listed. If you bought the car used and are unsure of the year, your records will tell you.
Material and finish
Every piece is made in the USA from 26-gauge 304 stainless steel and polished to a mirror shine. It is solid stainless, so the brightness belongs to the metal rather than a plated coating. Grade 304 is one of the most common stainless alloys for exterior trim, and 26 gauge refers to the sheet thickness.
Installing the kit
QAA pre-applies 3M automotive-grade acrylic foam tape to each piece, and the kit installs directly over the existing surface of the car. There is no drilling, and no factory trim comes off. QAA states the tape will hold for a lifetime without causing any damage to the vehicle's surface. Arrow accents look best when the tips line up perfectly, so dry-fit the complete set before peeling any liner. Work on clean, dry panels in the shade, then press each piece firmly along its length. The Installation tab covers the full order of work.
A matching rear accent
The QAA catalog data we have lists one companion part for this Fusion: RD46390, a one-piece rear deck accent for the trunk lid, 2.57" wide. Pairing it with the side accent carries the bright finish around to the back of the car. It is linked in the Fitment tab. If you are looking for other Fusion trim, call us and we will check what is available.
Why twelve pieces
Breaking the accent into twelve segments lets each one match its section of the body closely, rather than relying on a few long strips. It also makes each piece easier to handle during installation.
Questions
Call Quality Automotive Trims at 877-752-3811 with your model year and part number AT50390. The UPC and full specs are in the Specs tab.
AT50390 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT50390 |
| UPC | 691821686148 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1" |
| Coverage / notes | Arrow - 1" wide |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2012 Ford Fusion |
Fitment: AT50390
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2006-2012 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2012 Ford Fusion
- RD46390: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 12 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT50390 Body Side Molding Accent Trim
Which Fusion does AT50390 fit?
The 2006 to 2012 Ford Fusion, 4-door sedan.
What does "arrow" mean?
The accent ends in pointed tips. QAA lists it as an arrow profile, 1" wide.
How many pieces are in the kit?
Twelve.
Is it stainless steel?
Yes, polished 26-gauge 304 stainless steel, made in the USA.
How is it installed?
With pre-applied 3M acrylic foam tape over the existing surface, no drilling. QAA states the tape will hold for a lifetime without damaging the paint.
Is there matching trim for the trunk?
Yes, RD46390, a rear deck accent.
