Product Description
Ford F-150 2009-2014 Crew Cab 6'6" Bed with Flares, 12-Piece Stainless Side Accent (AT49306)
Fender flares give an F-150 a wider, tougher stance, but they also change the shape of the body side, and that matters for trim. QAA's AT49306 is the body side molding accent cut specifically for the 2009-2014 Ford F-150 Crew Cab with the 6'6" bed and flares. It is twelve pieces of polished stainless steel, 0.375" wide, laid out to follow the body around the flared wheel openings.
Built around the flares
QAA lists this kit with the note "w/ Flares" in the fitment, and that is the deciding detail. Its counterpart, AT49305, has the same twelve-piece count and width but is cut for the same truck without flares. They are not interchangeable. If your truck has flares, this is the kit. If it does not, choose AT49305.
The full fit check
Your truck needs to be a 2009, 2010, 2011, 2012, 2013, or 2014 F-150, Crew Cab 4-door pickup, with the 6'6" bed and flares. Other combinations have their own kits: AT49316 for the Crew Cab with the 5'5" bed and no flares, and AT49308, a ten-piece kit for the Regular Cab with the 6.5' bed and no flares. Measure your bed floor if you are unsure of its length, and look at the photos of each listing side by side.
A slim, bright line
Three-eighths of an inch wide, this accent reads as a fine stripe of steel along a full-size truck and catches the light without looking busy. It is made in the USA from 26-gauge 304 stainless steel and polished to a mirror shine. Because it is solid stainless, the finish is the metal itself rather than a plating, which makes it a natural partner for a chrome grille or stainless accents elsewhere on the truck.
How it attaches
The 3M automotive-grade acrylic foam tape is pre-applied, and the trim installs directly over the existing surface without drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface. Clean and dry the panels, then work a few pieces at a time. Dry-fit the pieces near the flares first, since those set the line for the rest. The Installation tab lays out the steps. Six model years are covered, so if you are buying for a used truck, confirm the year in your records as well as the bed length and flare setup.
Related F-150 trim
QAA's 2009-2014 F-150 catalog is large. It includes body molding insert kits and lower rocker kits for specific cab and bed combinations, some with flares and some without, plus a gas door cover, mirror cover sets, pillar post trim, and tailgate inserts. Check the flare note on each part before it goes in your order, because a truck with flares and one without take different parts. All are linked in the Fitment tab.
Questions
Call Quality Automotive Trims at 877-752-3811, tell us your cab, bed, and flare setup, and mention part number AT49306. The UPC is listed in the Specs tab.
AT49306 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT49306 |
| UPC | 691821645701 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.375" |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2014 Ford F-150 |
Fitment: AT49306
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2009-2014 | 4-door, Pickup Truck, Crew Cab, 6’6” bed, w/ Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2014 Ford F-150
- AT49308: 10-piece Body Side Molding Accent Trim
- AT49316: 12-piece Body Side Molding Accent Trim
- GC49308: 1-piece Gas Door Cover Trim
- MC49307: 2-piece Mirror Cover Set
- MC49310: 4-piece Mirror Cover Set
- MI49301: 10-piece Body Molding Insert Trim Kit
- MI49303: 10-piece Body Molding Insert Trim Kit
- MI49305: 12-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 12 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT49306 Body Side Molding Accent Trim
Which F-150 does AT49306 fit?
The 2009 to 2014 Ford F-150 Crew Cab, 4-door pickup with the 6'6" bed and flares.
What if my truck has no flares?
Use AT49305, the same style of kit cut for trucks without flares.
How many pieces and how wide?
Twelve pieces, 0.375" wide.
Is it stainless steel?
Yes, polished 26-gauge 304 stainless steel, made in the USA.
Do I need to drill?
No. The 3M acrylic foam tape is pre-applied and the kit goes over the existing surface. QAA states the tape will hold for a lifetime without damaging the paint.
Who do I call to confirm my truck?
Quality Automotive Trims, 877-752-3811.
