Product Description
F-150 Super Cab 6.5' Bed Side Molding Accent, 10-Piece Stainless, 2004-2014 (AT44302)
Ford built a lot of different F-150 configurations from 2004 through 2014, and QAA's side accent kits are cut to match specific ones. AT44302 is the ten-piece body side molding accent for the F-150 Super Cab with the 6.5' bed and no fender flares. It runs a slim 0.375" line of polished stainless steel along the side of the truck, a pinstripe of brightwork that stretches from the cab back along the bed.
Cab, bed, and flares all matter
Read the fitment line closely. QAA lists this kit for the 4-door Super Cab pickup with a 6.5' bed and NO flares. Each of those details changes the length and shape of the side of the truck. A different bed length uses a different kit: QAA's AT44312 is the same ten-piece, 0.375" accent cut for the Super Cab with the 8' bed. If your truck has fender flares, this kit is not listed for it. Measuring your bed or checking your build sheet before ordering saves a return.
Material
All ten pieces are made in the USA from 26-gauge 304 stainless steel and polished to a mirror shine. The brightness belongs to the metal, not a chrome layer, which is why it pairs well with stainless or chrome already on the truck. Grade 304 is one of the most common stainless alloys for exterior trim, and 26 gauge is the thickness of the sheet each strip is cut from. A narrow 0.375" strip keeps the look understated, which suits a work truck as well as a dressed-up one.
Installing on a pickup
The 3M automotive-grade acrylic foam tape comes pre-applied, and the strips install directly over the existing surface. No drilling. QAA states the tape will hold for a lifetime without causing any damage to the truck's surface. On a full-size pickup, ten pieces cover a long distance, so work in short runs, a few strips at a time. Clean the panels thoroughly, dry them, and hold each piece in place before peeling. A helper makes the longer pieces easier. See the Installation tab for the full order.
Matching F-150 trim
QAA catalogs a wide range for this truck. MI44302 is a ten-piece body molding insert kit, 1.5" wide, cut for the same Super Cab 6.5' bed with no flares. TH44302 is a ten-piece lower rocker kit for the same configuration, spanning up from the bottom of the door to 7.25-7.5". There are door handle cover kits with different keypad and keyhole options, two tailgate accents, one with a "4X4" cut out, and a four-piece wheel well fender trim molding. Check the cab and bed on each listing. All are linked in the Fitment tab.
Years covered
Eleven model years: 2004 through 2014, for the configuration above. The Fitment tab shows the catalog row exactly as QAA lists it.
Call before you order
F-150 configurations vary, so a quick check helps. Phone Quality Automotive Trims at 877-752-3811 with your year, cab and bed length, quote AT44302, and find the UPC on Specs.
AT44302 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT44302 |
| UPC | 691821350643 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.375" |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2014 Ford F-150 |
Fitment: AT44302
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2004-2014 | 4-door, Pickup Truck, Super Cab, 6.5'Bed, NO Flares |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2014 Ford F-150
- AT44312: 10-piece Body Side Molding Accent Trim
- DH44302: 4-piece Door Handle Cover Kit
- DH44305: 4-piece Door Handle Cover Kit
- DH44306: 4-piece Door Handle Cover Kit
- DH44308: 8-piece Door Handle Cover Kit
- DH44310: 8-piece Door Handle Cover Kit
- MI44300: 10-piece Body Molding Insert Trim Kit
- MI44302: 10-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 10 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT44302 Body Side Molding Accent Trim
Which F-150 does AT44302 fit?
The 2004 to 2014 Ford F-150 Super Cab, 4-door pickup with the 6.5' bed and no flares.
I have the 8' bed. Which kit do I need?
AT44312 is the same ten-piece accent cut for the Super Cab with the 8' bed.
Will it work if my truck has fender flares?
It is cataloged only for trucks with no flares.
How wide is the trim?
0.375", ten pieces, polished 26-gauge 304 stainless steel made in the USA.
How does it mount?
Pre-applied 3M acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without damaging the surface.
Can someone confirm my configuration?
Yes. Call Quality Automotive Trims at 877-752-3811.
