Product Description
Stainless Molding Insert Kit for the 2004-2014 F-150 Super Cab, 6.5' Bed, No Flares (MI44302)
MI44302 covers a long run of F-150 model years: 2004 through 2014. Its one fitment row is specific about the rest, though. It's tagged for the Ford F-150 Super Cab, 4-door, with a 6.5' bed and no flares. The kit is ten polished 304 stainless strips, 1.5 inches wide.
Same number, different part: AT44302
One thing on this sheet can cause confusion. AT44302 shares the number 44302 and carries the exact same tags, Super Cab, 6.5' bed, NO flares, but it's a different product: a 10-piece body side molding accent trim listed at 0.375, compared with this kit's 1.5 inch inserts. The catalog doesn't explain how the two relate on the truck or whether they're meant to be used together. Look at both sets of photos, and if you're deciding between them or thinking of buying both, call Quality Automotive Trims at 877-752-3811 first.
Is this your truck?
Check four things. The year falls between 2004 and 2014. The cab is a Super Cab. The bed is 6.5'; measure the bed floor if you're unsure. And the truck has no flares, since the tag reads "NO Flares." All four should match before you order.
Material, finish, mounting
Each of the ten strips is 26 gauge 304 stainless steel with a polished finish, made in the USA. They're attached with 3M automotive-grade acrylic foam tape and install directly over the existing surface, with no drilling. MI44302's prep steps can be found on the Installation tab. The sheet doesn't say which strip goes on which panel; follow the photos.
Before and during the install
Sort the ten strips on a towel and match each to the photos. Label the liners. Then wash and dry every molding and wipe it with rubbing alcohol, letting it flash off. Any chip or loose end on a molding should be dealt with before a strip goes over it. Dry-fit each strip with its liner on, mark the ends with painter's tape, and only then peel and press firmly from end to end. Doing one run completely, then checking the line, keeps the strips consistent. The Installation tab has the temperature range.
More F-150 parts tagged nearby
Besides AT44302, the sheet lists AT44312, another 10-piece accent trim at 0.375 for the Super Cab with 8' bed and no flares. Door handle cover kits: DH44302 at 4 pieces, levers only, no surround pieces; DH44305 at 4 pieces without the passenger keyhole, with driver keypad and keyhole; DH44306 at 4 pieces; DH44308 at 8 pieces with keypad access and no passenger key access; and DH44310 at 8 pieces with both. DH44305 and DH44306 are tagged 2-door. MI44300, MI44312, RT44308, RT44309, TH44300, TH44302, TH44312, DH44309 and WZ44308-AP are listed by number only.
Care
Polished stainless needs nothing special: mild soap, water and a soft cloth. Keep steel wool and abrasive pads away from it. If anything about the tags or the AT44302 question is unclear, call 877-752-3811 and mention MI44302.
MI44302 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI44302 |
| UPC | 691821353064 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2014 Ford F-150 |
Fitment: MI44302
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2004-2014 | 4-door, Pickup Truck, Super Cab, 6.5' Bed, NO Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2014 Ford F-150
- AT44302: 10-piece Body Side Molding Accent Trim
- AT44312: 10-piece Body Side Molding Accent Trim
- DH44302: 4-piece Door Handle Cover Kit
- DH44305: 4-piece Door Handle Cover Kit
- DH44306: 4-piece Door Handle Cover Kit
- DH44308: 8-piece Door Handle Cover Kit
- DH44310: 8-piece Door Handle Cover Kit
- MI44300: 10-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI44302 Body Molding Insert Trim Kit
What does MI44302 fit?
The 2004-2014 Ford F-150 Super Cab, 4-door, with a 6.5' bed and no flares.
How is AT44302 different?
AT44302 is a 10-piece body side molding accent trim at 0.375 with the same tags. The catalog doesn't explain how the two relate, so compare the photos or call 877-752-3811.
How many strips are included?
Ten, each 1.5 inches wide.
Do I need to drill?
No. The kit mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What material is it?
Polished 304 stainless steel, 26 gauge, made in the USA.
