Product Description
Ford F-150 Super Cab 5.5' Bed, No Flares: 10-Piece Stainless Molding Insert Kit (MI44300)
F-150 molding insert kits are split by cab, bed length and whether the truck has flares, so the tags matter more than the title here. MI44300 is a 10-piece kit of polished 304 stainless strips, each 1.5 inches wide, and its single fitment row reads: Ford F-150, 2004 through 2014, 4-door, pickup truck, Super Cab, 5.5' bed, NO flares.
Match all three tags
Cab: Super Cab. The row tags it 4-door.
Bed: 5.5'. If you're not sure of your bed length, measure the bed floor or check your truck's paperwork, then compare it with the tag.
Flares: the tag reads "NO Flares." If your truck has flares fitted around the wheel openings, this isn't the listed kit, and you should call before ordering.
Years: 2004 to 2014, as both the title and the row state.
If any of the four doesn't match, or you're unsure, call Quality Automotive Trims at 877-752-3811 with MI44300 and we'll help you find the right listing.
Ten strips, one width
All ten pieces are listed at 1.5 inches, cut from 26 gauge 304 stainless steel with a polished finish, made in the USA. The sheet doesn't say where each of the ten goes, so the product photos are the layout guide. Before anything gets peeled, lay all ten out on a clean surface, match them to the photos, and write a position on each liner. Ten pieces is a lot to keep track of, and labeling up front saves confusion halfway around the truck.
Mounting
The strips mount with 3M automotive-grade acrylic foam tape and install directly over the existing surface, which means no drilling. Prep for MI44300 on the F-150 is laid out on the Installation tab.
Install day
Choose a dry, mild day; the Installation tab has the temperature range and full steps. Wash every molding, dry it, and wipe it with rubbing alcohol. Work a few strips at a time. Dry-fit each strip with its liner on, set painter's tape at the ends, then peel and press firmly along the full length. After every few strips, stand back at the front corner and sight down the line before carrying on. Ten polished stainless strips make up the F-150 kit.
Other F-150 parts linked here
The sheet cross-lists sixteen parts. Two are 10-piece body side molding accent trims at 0.375: AT44302 for the Super Cab with 6.5' bed and no flares, and AT44312 for the Super Cab with 8' bed and no flares. Door handle cover kits include DH44302, 4 pieces covering the levers only; DH44305, 4 pieces without the passenger keyhole and with driver keypad and keyhole; DH44306, 4 pieces; DH44308, 8 pieces with keypad access and no passenger key access; and DH44310, 8 pieces with keypad and passenger key access. DH44305 and DH44306 are tagged 2-door. MI44302, MI44312, RT44308, RT44309, TH44300, TH44302, TH44312, DH44309 and WZ44308-AP are listed by number only.
To keep the polished stainless clean, use mild soap on a soft cloth.
MI44300 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI44300 |
| UPC | 691821596881 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2014 Ford F-150 |
Fitment: MI44300
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2004-2014 | 4-door, Pickup Truck, Super Cab, 5.5' Bed, NO Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2014 Ford F-150
- AT44302: 10-piece Body Side Molding Accent Trim
- AT44312: 10-piece Body Side Molding Accent Trim
- DH44302: 4-piece Door Handle Cover Kit
- DH44305: 4-piece Door Handle Cover Kit
- DH44306: 4-piece Door Handle Cover Kit
- DH44308: 8-piece Door Handle Cover Kit
- DH44310: 8-piece Door Handle Cover Kit
- MI44302: 10-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI44300 Body Molding Insert Trim Kit
Which F-150 does MI44300 fit?
The 2004-2014 Ford F-150 Super Cab with a 5.5' bed and no flares, tagged 4-door.
My truck has flares. Will it fit?
This kit is tagged "NO Flares." Call 877-752-3811 before ordering and we'll help find the right listing.
How many pieces and how wide?
Ten strips, each 1.5 inches wide.
Do I need to drill?
No. The strips mount with 3M automotive-grade acrylic foam tape directly over the existing surface.
What's it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
