Product Description
Stainless Side Accent Trim for the 2004-2014 Ford F-150 Super Cab with the 8' Bed, 10 Pieces (AT44312)
The long-bed Super Cab is one of the longest F-150s Ford built in the 2004-2014 years, and it has a lot of flat side panel to work with. QAA's AT44312 is a body side molding accent made for exactly that truck: the 4-door F-150 Super Cab pickup with the 8' bed and no flares. Ten pieces of polished stainless steel, each 0.375" wide, carry a thin bright line along the cab and the full length of the bed.
Make sure it is the right truck
Three details define the fit, and all three need to match your F-150:
- Super Cab, listed as a 4-door pickup.
- The 8' bed.
- No fender flares.
QAA makes a nearly identical ten-piece accent, AT44302, for the Super Cab with the 6.5' bed. The two are not interchangeable, because the bed length changes how far the accent runs. If you are not sure which bed you have, measure the inside length of the bed floor before you order, or call us with your details.
What it is made of
QAA makes every piece in the USA from 26-gauge 304 stainless steel, polished to a mirror shine. The finish is the steel, so there is no plated layer to fade or peel. Grade 304 is a standard choice for exterior brightwork, and the 26-gauge figure is the sheet thickness.
Mounting the kit
Each strip carries pre-applied 3M automotive-grade acrylic foam tape and installs directly over the existing surface of the truck. You will not drill or remove anything. QAA states the tape will hold for a lifetime without damaging the surface. On a long-bed F-150, plan a session for each run of strips rather than rushing all ten at once. Wash and dry the panels, lay the ten pieces out in order, check the line by eye from a few steps back, then press each one down firmly. The Installation tab gives a full routine.
Other parts for the long-bed Super Cab
QAA cuts two companion kits for this same configuration. MI44312 is a ten-piece body molding insert kit, 1.5" wide, and TH44312 is a ten-piece lower rocker kit that spans from the bottom of the door up to 7.25-7.5". Beyond those, the F-150 catalog includes door handle cover kits with several keypad and keyhole combinations, two 6.5" tailgate accents (one with a "4X4" cut out), and a wheel well fender trim molding. Every link is in the Fitment tab. Check cab and bed on each one, since several are cut for one configuration only.
Model years
The listing covers eleven model years, 2004 through 2014, for the Super Cab long-bed truck without flares. The Fitment tab shows the exact catalog wording. Over a run that long, plenty of these trucks have changed hands, so if you bought yours used, confirm the bed length rather than relying on the listing you bought it from.
Questions
Call Quality Automotive Trims at 877-752-3811 with your year, cab, and bed length. Mention part number AT44312 and we will confirm it before you buy. The UPC is in the Specs tab.
AT44312 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT44312 |
| UPC | 691821604159 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.375" |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2014 Ford F-150 |
Fitment: AT44312
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2004-2014 | 4-door, Pickup Truck, Super Cab, 8'Bed, NO Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2014 Ford F-150
- AT44302: 10-piece Body Side Molding Accent Trim
- DH44302: 4-piece Door Handle Cover Kit
- DH44305: 4-piece Door Handle Cover Kit
- DH44306: 4-piece Door Handle Cover Kit
- DH44308: 8-piece Door Handle Cover Kit
- DH44310: 8-piece Door Handle Cover Kit
- MI44300: 10-piece Body Molding Insert Trim Kit
- MI44302: 10-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 10 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT44312 Body Side Molding Accent Trim
What truck does AT44312 fit?
The 2004 through 2014 Ford F-150 Super Cab, 4-door pickup, with the 8' bed and no flares.
What if I have the 6.5' bed?
Choose AT44302, the same style of accent cut for the 6.5' bed.
How many pieces, and how wide?
Ten pieces, each 0.375" wide.
Is it chrome or stainless?
Polished 26-gauge 304 stainless steel, made in the USA.
Does it need drilling?
No. It uses pre-applied 3M acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without harming the surface.
What else is cut for the long-bed Super Cab?
MI44312, a body molding insert kit, and TH44312, a lower rocker kit, both ten pieces.
