Product Description
Stainless Side Accent for the 2009-2014 F-150 Crew Cab with the 5'5" Bed, No Flares, 12 Pieces (AT49316)
The short-bed Crew Cab is the F-150 many families drive every day: four full doors, a 5'5" bed, and a body that is all cab up front. QAA's AT49316 is the body side molding accent for that truck in the 2009-2014 model years, when it is built without fender flares. It is a twelve-piece set of polished stainless steel, 0.375" wide, that puts a narrow bright line along the doors and the short bed.
Matching the configuration
Ford offered the 2009-2014 F-150 Crew Cab with more than one bed and with or without flares, and QAA cuts each combination separately. This kit requires:
- Cab: the four-door Crew Cab pickup.
- 5'5" bed.
- No flares.
If you have the 6'6" bed, look at AT49305 (no flares) or AT49306 (with flares). For the two-door Regular Cab with the 6.5' bed, it is AT49308. The 2009-2010 Crew Cab short bed with flares has its own kit as well, AT49317. Measuring the bed floor is the quickest way to settle which length you have.
The look
At three-eighths of an inch wide, this is a restrained accent. It's not loud; it gives a crisp line of brightwork that visually ties the F-150's cab and bed together. Every piece is made in the USA from 26-gauge 304 stainless steel and polished to a mirror shine, so the finish is in the metal and matches factory chrome and other stainless on the truck. Grade 304 is a standard stainless for exterior trim, and 26 gauge is the sheet thickness.
Install
QAA pre-applies 3M automotive-grade acrylic foam tape to each piece. The trim installs directly over the existing surface, so no drilling and no factory parts come off. QAA states the tape will hold for a lifetime without causing any damage to the surface. Clean and dry the panels, lay out the twelve pieces in order, and work from the front door rearward. Step back after every few pieces to check that the line stays straight. The Installation tab has the full routine.
Related trim
The 2009-2014 F-150 catalog from QAA includes body molding insert kits and lower rocker kits for specific cab and bed combinations, a gas door cover listed for both 2-door and 4-door pickups, two mirror cover sets, pillar post trim, and tailgate inserts. When fitting parts, check each is listed for the 5'5" bed and your truck's flare setup. The Fitment tab links them all.
Model years covered
QAA lists this kit for 2009, 2010, 2011, 2012, 2013, and 2014. That is six model years of the same configuration. Whatever condition your truck is in, start with clean, sound paint along the mounting line for the best result, and confirm the year in your records if you bought the truck used, since the bed and flare details matter as much as the year.
Questions
Call Quality Automotive Trims at 877-752-3811 with your year, cab, bed, and flare details, and mention part number AT49316. The UPC is in the Specs tab.
AT49316 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT49316 |
| UPC | 691821698868 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.375" |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2014 Ford F-150 |
Fitment: AT49316
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2009-2014 | 4-door, Pickup Truck, Crew Cab, 5’5” bed, NO Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2014 Ford F-150
- AT49306: 12-piece Body Side Molding Accent Trim
- AT49308: 10-piece Body Side Molding Accent Trim
- GC49308: 1-piece Gas Door Cover Trim
- MC49307: 2-piece Mirror Cover Set
- MC49310: 4-piece Mirror Cover Set
- MI49301: 10-piece Body Molding Insert Trim Kit
- MI49303: 10-piece Body Molding Insert Trim Kit
- MI49305: 12-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 12 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT49316 Body Side Molding Accent Trim
What F-150 does AT49316 fit?
The 2009 through 2014 Ford F-150 Crew Cab, 4-door pickup with the 5'5" bed and no flares.
My Crew Cab has the 6'6" bed. Which kit fits?
AT49305 without flares, or AT49306 with flares.
My 2009 short-bed Crew Cab has flares. Is this the right kit?
No. AT49317 is the kit for the 2009-2010 Crew Cab with the 5'5" bed and flares.
How wide is it, and how many pieces?
0.375", twelve pieces of polished 26-gauge 304 stainless steel made in the USA.
How is it installed?
With pre-applied 3M acrylic foam tape, over the existing surface. QAA states the tape will hold for a lifetime without damaging the paint.
Who do I call?
Quality Automotive Trims, 877-752-3811.
