Product Description
Mercedes E Class Wagon 1996-2002 Stainless Gas Door Trim (GC96060)
The key detail for GC96060 is the body style. Its Fitment row lists the Mercedes E Class 4-door Wagon, model years 1996 through 2002, seven years in total, and Wagon is the only body named. The product title says only "Mercedes E Class," so it reads broader than the data; we've flagged that. If you drive the sedan, call us before ordering, because this gas door piece is not tagged for it.
GC96060 is E Class trim, not a replacement cap and not a replacement part. The 1996-2002 E-Class wagon's existing fuel door has to be there, because the trim bonds to its outer face.
The E Class fuel door trim is one polished piece of 304 stainless, 26 gauge, from the USA. The E Class overlay goes on using 3M automotive-grade acrylic foam tape. It installs directly over the existing surface with no drilling, and QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
The cross-listed pillar sets show why body style matters on this sheet. PP96060, a four-piece pillar post set, and PP96064, a ten-piece set, are both tagged 4-door Wagon. PP96061, a six-piece set, is tagged 4-door Sedan, so it isn't meant for the wagon. QAA doesn't say which posts the ten-piece set's additional pieces cover, so compare photos, and check each listing for its finish.
A car from these years deserves a close look at the paint before anything is stuck to it. Inspect the fuel door for chips along its edge, clear coat that has clouded or begun to peel, small cracks and blisters, and repair them first, polishing tired paint back to a firm surface if needed. Make sure the door still closes flush.
When the paint is ready, wash the door with soapy water, rinse it, and let it dry completely, then wipe it with a degreaser. A finish of this age may hold several layers of wax, so a second pass is worthwhile. Set the trim on the closed door with the liner still attached and adjust it until the border of paint is even on all sides. Mark the spot with a couple of strips of painter's tape. Remove the liner, align the trim with the marks, and press firmly across its entire face, going over it again after a minute. Ease the door open to confirm it swings freely. The Installation tab has more detail.
Polished 304 stainless has a bright, reflective look, and 26 gauge keeps the overlay slim. Install on a dry, mild day and leave the tape overnight before washing. Afterward, mild soap and a soft cloth keep it clean; wipe off any fuel drips.
If you're not sure whether your car is listed, your records show the model year and body. A single gas door piece is also the easiest way to see the polished finish on your wagon before choosing between the four- and ten-piece pillar sets. Questions about the wagon fitment? Call Quality Automotive Trims at 877-752-3811 and mention GC96060. The UPC is on the Specs tab.
GC96060 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC96060 |
| UPC | 691821465545 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1996-2002 Mercedes E Class |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC96060
| Vehicle | Years | Body style |
|---|---|---|
| Mercedes E Class | 1996-2002 | 4-door, Wagon |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1996-2002 Mercedes E Class
- PP96061: 6-piece Pillar Post Trim
- PP96060: 4-piece Pillar Post Trim
- PP96064: 10-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC96060 Gas Door Cover Trim
Is GC96060 a replacement gas door?
No. It is not a replacement cap or replacement part. You MUST have the existing gas door to install this piece.
Does it fit the E Class sedan?
The fitment row lists the 4-door Wagon only. Call 877-752-3811 before ordering for a sedan.
Which years fit?
The 1996-2002 Mercedes E Class 4-door Wagon.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
